Adams Rite MS1952-355-628 Deadlock with Hookbolt and 1-1/8" Backset in Clear Anodized

The MS1952-355-628 from Adams Rite is a Deadlock with Hookbolt and 1-1/8" backset in clear anodized. The MS1952 Series Deadlocks utilizes a laminated stainless steel bolt which is activated by a pivot mechanism to provide the maximum security for a single leaf narrow stile door such that even a very tall and flexible one or an installation where the gap between the door and jamb is greater than it should be. It operates in such a way that the 360 degree turn of key or thumbturn throws or retracts the counterbalanced bolt and the key can be removed only when bolt is in a positively locked or unlocked position. The lock accepts any standard 1-5/32" diameter mortise cylinder or thumbturn from either or both sides. The cylinder must have MS dimensioned cam.

Features

• Clear Anodized finish
• Cylinder Backset: 1-1/8"
• Case is made of fully stainless steel with internal components that measures 1" x 6" x depth (depth varies by backset)
• Hookbolt made of eight ply laminated stainless steel that measures 5/8" x 1-3/8" x 2-7/8" with 1-3/8" throw
• Bevel faceplate measures 1" x 6-7/8"
• Handed operation - LH or RHR (Left Hand or Right Hand Reverse door)
• Cylinder is not included
• MS1952 Deadlocks are operable by any standard 1-5/32" diameter mortise cylinder with MS cam
• Grade 1 strength
• Strike not included

Downloads

The MS1952-355-628 from Adams Rite is a Deadlock with Hookbolt and 1-1/8" backset in clear anodized. The MS1952 Series Deadlocks utilizes a laminated stainless steel bolt which is activated by a pivot mechanism to provide the maximum security for a single leaf narrow stile door such that even a very tall and flexible one or an installation where the gap between the door and jamb is greater than it should be. It operates in such a way that the 360 degree turn of key or thumbturn throws or retracts the counterbalanced bolt and the key can be removed only when bolt is in a positively locked or unlocked position. The lock accepts any standard 1-5/32" diameter mortise cylinder or thumbturn from either or both sides. The cylinder must have MS dimensioned cam.

Features

• Clear Anodized finish
• Cylinder Backset: 1-1/8"
• Case is made of fully stainless steel with internal components that measures 1" x 6" x depth (depth varies by backset)
• Hookbolt made of eight ply laminated stainless steel that measures 5/8" x 1-3/8" x 2-7/8" with 1-3/8" throw
• Bevel faceplate measures 1" x 6-7/8"
• Handed operation - LH or RHR (Left Hand or Right Hand Reverse door)
• Cylinder is not included
• MS1952 Deadlocks are operable by any standard 1-5/32" diameter mortise cylinder with MS cam
• Grade 1 strength
• Strike not included

Downloads