Interlogix NX-590NE NetworX Ethernet-Connected Network Module for Central Stations.
The NetworX Ethernet Module brings new functionality to the world of controls with Ethernet connectivity to your central station. Working in conjunction with the Osborne-Hoffman Network Receiver, a direct pipe is established into your current automation.
The module can send events to two IP addresses for dual, split or backup reporting. Events may also be sent to two e-mail addresses. The NetworX control panel can also be configured for dial or cellular backup should network communications fail. Triple-DES encryption is used to protect data from being compromised. To further enhance network security, a dynamic KEY generation is employed with a new 24-byte random number generated for every event.
The module also offers the choice of static IP, where the IP addresses are fixed and assigned by IS department; or DHCP, where a pool of IP addresses is assigned by a server to units on the network and IP addresses here can and do change. Either way, all functions are programmable via keypad or DL900 upload/download software.
Features
- Up to 1,000 NX-590NEs can be monitored on the Osborne-Hoffman Network Receiver
- Backwards compatible to all NetworX controls and resides in a 6-inch slot in the control cabinet
- Provides 10/100BASE-TX Ethernet connectivity with TCP/IP
- On-site or remote-initiated download using DL900 software
- Code updates for NX-590NE can be downloaded and flashed into modules over the network
- Uses SIA or Contact ID reporting formats
- Installer-selectable polling time for full supervision
- Low current draw of 90mA in standby and 120mA during communication at 12VDC from NX control panel
- Small bandwidth used with typical message (20 Bytes)
Downloads
Interlogix NX-590NE NetworX Ethernet-Connected Network Module for Central Stations.
The NetworX Ethernet Module brings new functionality to the world of controls with Ethernet connectivity to your central station. Working in conjunction with the Osborne-Hoffman Network Receiver, a direct pipe is established into your current automation.
The module can send events to two IP addresses for dual, split or backup reporting. Events may also be sent to two e-mail addresses. The NetworX control panel can also be configured for dial or cellular backup should network communications fail. Triple-DES encryption is used to protect data from being compromised. To further enhance network security, a dynamic KEY generation is employed with a new 24-byte random number generated for every event.
The module also offers the choice of static IP, where the IP addresses are fixed and assigned by IS department; or DHCP, where a pool of IP addresses is assigned by a server to units on the network and IP addresses here can and do change. Either way, all functions are programmable via keypad or DL900 upload/download software.
Features
- Up to 1,000 NX-590NEs can be monitored on the Osborne-Hoffman Network Receiver
- Backwards compatible to all NetworX controls and resides in a 6-inch slot in the control cabinet
- Provides 10/100BASE-TX Ethernet connectivity with TCP/IP
- On-site or remote-initiated download using DL900 software
- Code updates for NX-590NE can be downloaded and flashed into modules over the network
- Uses SIA or Contact ID reporting formats
- Installer-selectable polling time for full supervision
- Low current draw of 90mA in standby and 120mA during communication at 12VDC from NX control panel
- Small bandwidth used with typical message (20 Bytes)
Downloads
There are no reviews for this product.
No questions about this product.
