ETS STW3 Audio Kit - STW1 Microphone/Speaker & STW2 Base Station

STW1 Microphone/Speaker, STW2 Base Station.

Single zone 2 way audio surveillance system. Can be used independently for monitoring live audio or with tape recorders for recording and playback.

STW1 Mic./speaker:

• Omni-directional element w/25 range
• Low noise MOSFET pre-amplifier
• Line level, unbalanced output
• Adjustable gain
• Treble boost circuit. Selectable on/off
• Limiter circuit. Selectable on/off
• Easy cable run termination
• Flush or surface mountable
• Power: 12 VDC @ 10mA
• 2.25" .25w speaker
• 70V line speaker input
• Stainless steel cover plate

STW2 Base station:

• Built in talk-back microphone & pre-amp
• 70V Line speaker output
• Call switch input
• Remote speaker volume control
• Standard RCA jacks for VTR connections
• 1 Watt Power amplifier
• 3" full range speaker
• Tape monitor switch
• 3.5mm Headphone jack
• Power: 16 VAC @ 250mA

Downloads

STW1 Microphone/Speaker, STW2 Base Station.

Single zone 2 way audio surveillance system. Can be used independently for monitoring live audio or with tape recorders for recording and playback.

STW1 Mic./speaker:

• Omni-directional element w/25 range
• Low noise MOSFET pre-amplifier
• Line level, unbalanced output
• Adjustable gain
• Treble boost circuit. Selectable on/off
• Limiter circuit. Selectable on/off
• Easy cable run termination
• Flush or surface mountable
• Power: 12 VDC @ 10mA
• 2.25" .25w speaker
• 70V line speaker input
• Stainless steel cover plate

STW2 Base station:

• Built in talk-back microphone & pre-amp
• 70V Line speaker output
• Call switch input
• Remote speaker volume control
• Standard RCA jacks for VTR connections
• 1 Watt Power amplifier
• 3" full range speaker
• Tape monitor switch
• 3.5mm Headphone jack
• Power: 16 VAC @ 250mA

Downloads