2 SM1 microphone, SMM2 mixer, SM3 amplifier. Complete single zone, 2 microphone, audio surveillance system with built in speaker and headphone jack. Expands pickup coverage to 50 feet in all directions using 2 SM1 microphone signals mixed together. SMM2 mixer has volume controls for each microphone. The SM6-M2 can be used independently for monitoring live audio or with tape recorders and DVRs for recording and playback.
SMM2 Mixer
- Powered by SM3 base station
- Level controls for each microphone
- 3 position Euro-style connectors make cable terminations fast and clean
- Power consumption 20ma@12Vdc
SM1 Microphone
- Omni-directional Electret element. 25’ range in all directions
- Low noise MOSFET pre-amplifier
- Line level, unbalanced output
- Adjustable gain
- Treble boost circuit. Selectable on/off
- Enhances clarity of time lapse recordings
- Limiter circuit. Selectable on/off
- 3 position Euro-style connector makes cable termination fast and clean
- Flush mountable. Can be mounted on a single gang electrical box
- Power: 12 VDC @ 10mA
SM3 Amplifier
- Standard RCA jacks for connection to tape recorders, DVRs, etc
- 3 position Euro-style connector makes cable termination fast and clean
- 1 Watt Power amplifier
- 3” full range speaker
- Tape monitor switch
- 3.5mm Headphone jack
- Power: 12 VDC @ 250mA
- Reverse polarity protected and fused
Downloads
2 SM1 microphone, SMM2 mixer, SM3 amplifier. Complete single zone, 2 microphone, audio surveillance system with built in speaker and headphone jack. Expands pickup coverage to 50 feet in all directions using 2 SM1 microphone signals mixed together. SMM2 mixer has volume controls for each microphone. The SM6-M2 can be used independently for monitoring live audio or with tape recorders and DVRs for recording and playback.
SMM2 Mixer
- Powered by SM3 base station
- Level controls for each microphone
- 3 position Euro-style connectors make cable terminations fast and clean
- Power consumption 20ma@12Vdc
SM1 Microphone
- Omni-directional Electret element. 25’ range in all directions
- Low noise MOSFET pre-amplifier
- Line level, unbalanced output
- Adjustable gain
- Treble boost circuit. Selectable on/off
- Enhances clarity of time lapse recordings
- Limiter circuit. Selectable on/off
- 3 position Euro-style connector makes cable termination fast and clean
- Flush mountable. Can be mounted on a single gang electrical box
- Power: 12 VDC @ 10mA
SM3 Amplifier
- Standard RCA jacks for connection to tape recorders, DVRs, etc
- 3 position Euro-style connector makes cable termination fast and clean
- 1 Watt Power amplifier
- 3” full range speaker
- Tape monitor switch
- 3.5mm Headphone jack
- Power: 12 VDC @ 250mA
- Reverse polarity protected and fused
Downloads
There are no reviews for this product.
No questions about this product.
