Altronix T1RM3CK1D 4-Door Altronix/Mercury Access and Power Integration Wired Rack Mount Kit

Altronix T1RM3CK1D is a 4-door access and power integration kit which includes Altronix sub-assemblies along with factory installed wire management assemblies that are pre-configured terminal blocks for Mercury* hardware. This unit provides ample dual voltage outputs to support Mercury platform controllers locking devices. The accommodates one (1) Intelligent Reader Controller Interface Modules. Trove Plus simplifies field installations reliable, robust critical control most demanding applications. Also compatible these authentic partners:
AccessNsite, Avigilon, BadgePass, BluBox, Feenics, Genetec, Identicard, IMRON, Johnson Controls, Kastle, Keri Systems, LockState, Maxxess, Midpoint Security, NLSS, Open Options, Panasonic i-PRO MonitorCast, Quintron, RS2, S2 Schneider Electric, Vanderbilt.

Features

eFlow6NB Supply/Charger

Input

• Voltage: 120VAC, 60Hz, 3.5A max
• Fusing: 5A / 250V

Output

• Voltage: 24VDC
• Current: 6A continuous
• Auxiliary: 1A (unswitched)
• Other: Overvoltage protection. Filtered regulated

Battery Charging

• Type: Sealed lead acid or gel type
• Failover: Upon AC loss, instantaneous
• (Batteries sold separately)

Fire Alarm Disconnect

• Supervised: Latching non latching
• EOL: 10K Resistor

Supervision

• AC Failure: Form “C” contacts
• Battery: contacts
• Low DC Shutdown: Shuts down output terminals if battery drops below 70-75% 24V units. Prevents deep discharge

Indicators LED

• Input: 120VAC present
• DC Output: Powered
• Battery: Discharged not connected

PDS8CB Distribution Module

Input

• Voltage: 24VDC from eFlow6NB 12VDC VR6
• Input PTC: 9A

Outputs

• Voltage: 12 individually selectable
• Output PTCs: 2.5A

Indicators (LED)

• DC Eight (8) individual LEDs
• Green: 12VDC
• Red: 24VDC

VR6 Regulator

Input

• Voltage: eFlow6NB

Output

• Voltage: 12VDC
• Current: continuous
• Other: Surge suppression

Indicators (LED)

• Input: present
• Output: Powered

ACM4CB Controller

Input

• Voltage: eFlow6NB
• Fusing: 10A 24VDC
• Four (4) independently controlled 2.5A outputs:
• a) Four Fail-Safe and/or Fail-Secure outputs
• b) dry rated relay c) Any combination of above
• Four auxiliary (unswitched)
• Output (LED's)

Environmental

Temperature

Relative Humidity

BTU/Hr (approx.):