Altronix eBridge1STR Ethernet over Coax/Cat5e Adapters for Extended Distance

eBridge1STR is a versatile solution adapter/media converter kit which transmits data at 25Mbps and power Coax cable in PoE+ compliant format. The eBridge1PCRM powered via midspan, such as Altronix Netway series, by an endspan. passes PoE(+) eBridge1ST turn this enabled IP Camera/device. These plug play units facilitate cost effective solutions for devices that need be installed distances greater than 100m. They provide simple way replace legacy analog products with new existing coax.

Applications

• Retrofit cameras CCTV installation.
• Works Megapixel non cameras.
• Extend Network link distance industrial environment 610m.
• Upgrade deployed Retail, Casinos, Airports, Schools, Hospitals, etc.

Input eBridge100RM

• Powered midspan IEEE 802.3af (15W) and PoE+ 802.3at (30W)

Ethernet

• Connectivity: RJ45, auto-crossover.
• Wire 4-pair CAT5.
• Distance: up 500m.
• Speed: 10/100BaseT, half/full duplex, auto negotiation. PoE (30W) Delivered camera eBridge1ST. provided protocol.
• Throughput rated pass 500m.

Coax Link

• Distance: 500m delivery.
• Connectivity: BNC, RG-59/U similar.

LED Indicators

• eBridge1PCRM eBridge1ST: Yellow ON (by respective RJ45 jack).
• eBridge1PCRM Green LED (RJ45) status, 10/100Base-T/active.

Environmental

• Operating Temperature eBridge1PCRM: -20 C +49 (-4 F 120.2 F).
• Operating eBridge1ST: 15W -40 167 (-40 75 C). 25W 140 60 C).
• Storage Temperature: C).
• Humidity: 20 85%, non-condensing.

Functions

• Auto detection protection non-PoE cameras/devices.