Altronix Pace1STR IP and PoE+ Adapter Kit

Pace1STR is a long range adapter kit which transmits data at 100mbps full duplex and power via Cat5e higher cable in PoE(+) compliant format. The Pace1PRM powered midspan such as Altronix Netway series by an endspan. passes Pace1ST mini turn this enabled IP camera/device. These plug play units facilitate cost effective solutions for devices that need be installed distances greater than 100m.

Applications

• Retrofit cameras analog CCTV installations
• Works with Megapixel non cameras.
• Extend Network link distance industrial environment 610m.

Input

• Powered IEEE 802.3af (15W) PoE+ 802.3at (30W).

Ethernet

• Connectivity: RJ45, auto-crossover.
• Wire 4-pair higher.
• Distance: up 457m (1,500 ft.).
• Speed: 10/100BaseT, half/full duplex, auto negotiation. PoE (30W) delivered camera Pace1ST. provided protocol.
• Throughput rated pass ft.). proper headend equipment supports Megapixel, HD720, HD1080.

CAT5e Higher:

• Distance: ft.) @ 100mbps.

LED Indicators

• Pace1PRM/Pace1ST: Green ON (by respective RJ45 jack).
• Pace1PRM (RJ45 jack): Yellow Green LED status, 10/100Base-T/active.

Environmental

• Operating Temperature Pace1PRM: -20 C +49 (-4 F 120.2 F).
• Operating Pace1ST: For 15W: -40 75 (-40 167 F). 30W: 65 149 F).
• Storage Temperature: C).
• Humidity: 20 85%, non-condensing.

Functions

• Auto detection protection legacy non-PoE cameras/devices.