Comnet CLLFE4POEU 4-Ch Ethernet-over-UTP Extender With 30W PSE PoE+

Local Four-Channel Ethernet-over-UTP Extender With 30W PSE PoE+.

The Comnet CopperLine Ethernet over copper line supports up to sixteen channels of 10/100Mbps PoE+ Power Injection and Pass-through twisted pair cable (CAT-5, UTP). the ability connect directly a switch, or generate 48 56 V input either Local Remote ends, these units provide ultimate flexibility for extending powered device (PD) long distance copper. complete set includes both module. are available in small package sizes that include one four channels, modules same packages as well 1RU rack larger channel counts.

• Transmits individual data standard UTP
• Extends 3,000 feet (914 m) at 10 Mbps 2,000 (610 100 UTP cable
• Extended temperature operation from -40°C +75°C
• Extended PoE meets IEEE 802.3at Ethernet
• Full 10/100 Bandwidth
• Supports Multicast, Unicast Jumbo Frame
• Symmetric Bandwidth provides consistent upload download virtually zero packet loss total usable distance
• Type tested RFC-2544 TCP/IP network transmission standards
• User-selectable rate maximum utilization
• Complies all major standards RFC protocols UDP, TCP/IP, HTTP/HTTPs
• Tested certified† by an independent laboratory full compliance environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity condensation, high-line/low-line voltage conditions transient protection) NEMA TS-1/TS-2 CALTRANS Traffic Signal Control Equipment Specifications
• LED status indicators confirm status