Pelco EC-1501U-M EthernetConnect Local/Remote Single Port UTP Extender

Pelco EC-1501U-M | Extends Ethernet up to 914 m (3,000 ft) at 10 Mbps or 610 (2,000 feet) 100 over Cat5/Cat5e/Cat6 UTP Cable Extended Temperature Operation. Buy Now.

EthernetConnect local remote Single port extender Cat5 Pass through 15 Watts PoE. The EC-1500C Series is ideally suited for applications where existing coaxial needs be leveraged transmission of IP signals. applications, EC-1500U an effective device beyond (328 limit traditional Ethernet. In addition, system configurations that have a connected camera, EC-1500C/U can PoE (up W) camera. Designed cost-effective, general-use product, provides maximum flexibility these without any programming.

The EthernetConnect used extend copper (EoC). 16 ports 10/100 with pass-through cable. twisted pair Single-channel units powered from source, allowing installed network power not readily available.

• Transmits Individual Data Channels (PoE) Standard Cable
• Extends 1,524 (5,000 549 (1,800 Cable
• Extended Operation -40° 75°C (-40° 167°F)
• Extended Meets IEEE802.3af Ethernet
• Full Bandwidth
• Supports Multicast, Unicast, and Jumbo Frame
• Symmetric Bandwidth Consistent Upload Download Virtually Zero Packet Loss Total Usable Distance
• Type Tested RFC-2544 TCP/IP Standards
• User-Selectable Rate Distance Utilization
• Complies all Major IEEE Standards RFC Protocols UDP, TCP/IP, HTTP/HTTPs
• Tested Certified by Independent Laboratory Full Compliance Environmental Requirements (Ambient Operating Temperature, Mechanical Shock, Vibration, Humidity Condensation, High-Line/Low-Line Voltage Conditions, Transient Protection) NEMA TS-1/TS-2 Caltrans Specification Traffic Signal Control Equipment
• LED Status Indicators Confirm Status
• Available Small Unit Size, Interchangeable Stand-Alone, 1 RU Rack-Mounted Models
• Designed Manufactured USA