4-4-6 Aluminum SEU Service Entrance Cable

Applications:
Aluminum SEU cable is primarily used as panel feeder in multiple unit dwellings and for branch circuits. Maximum operating temperature not to exceed 90°C wet locations. Voltage rating 600 volts.

Construction:

Conductor - has a compact strand soft drawn 8000 series conductor, per ASTM B-801 Insulation type XHHW-2 cross linked polyethylene (XLP) insulation. The conductors are cabled together with an alloy concentric neutral covered reinforced binder tape. Jacket gray sunlight resistance polyvinyl chloride (PVC) jacket. Standards:
UL 44, 854
Federal Specification J-C 30B
Ampacities based on National Electric Code, 2005 edition, section 310-15
60°C when terminated equipment circuits rated 100amps or less marked 14ga through 1ga conductors
70°C over larger than 1ga
dry locations dwelling units, shall be permitted at listed utilized 120/240 volt, 3-wire, single phase service that supply total load Specifications*:

Insulated Size: 4 AWG
Bare 6 AWG Outside Diameter: 0.502 inches
Ampacity: 75 amps @ 90°C
Net Weight: .184 lbs/ft

*Data provided this page subject change different manufacturers variances.