4/0 XHHW Building Wire

Cut to length - sold by the foot. Enter desired footage in QTY box.
Minimum 1' maximum 1000'. Please call for longer put ups.

Applications:
Type XHHW-2/RW90 building wire is intended general purpose applications utilized conduit, underground or other recognized raceways services, feeders, and branch-circuit wiring as specified National Electrical Code (NEC). permitted 600 volt can be used wet dry locations at temperatures not exceed 90�_C. Suitable requiring low-leaking circuits a dielectric constant of 3.5 less.

Features:
Available sizes 14 AWG through 1000 KCMIL. On 250 KCMIL larger, sequential foot markings located every easy measuring. 1 4/0 AWG, master reels only unless otherwise specified. 6 larger rated Sunlight Resistant all colors. 1/0 are cable tray use comply with IEEE 1202/FT4 (70,000 Btu/hr) flame test ICEA T-29-520 (210,000 test.

Standards:
Underwriters Laboratories Standard UL-44
ASTM Stranding Class B3, B8, B787
Federal Specification A-A-59544
Canadian Standards Association C22.2 No. 38
NEMA WC-70/ICEA S-95-658
NFPA 70: (NEC)
UL 1685-FT4/IEEE 1202 (1/0 larger)
Test
ARRA 2009; Section 1605 "Buy American" Compliant

Construction:
Conductors:
Stranded, uncoated bare copper conductors per ASTM-B3, ASTM-B787 ASTM-B8
Insulation:
Cross-linked polyethylene (XLPE) insulation UL-44

Specifications*:

Size: AWG
Number Strands: 19
Insulation Thickness XLPE: 1.40 mm / 0.055 inches
Outside Diameter: 15.75 0.620 Weight: 0.735 lbs ft
Allowable Ampacity: 195 Amps 60ºC 230 75ºC 260 90ºC

*Data provided this page subject change based different manufacturers variances.