1/0 AWG 3C Type SHD-GC Shielded Round Power Cable, 2kV

1/0 AWG 3C Type SHD-GC Shielded Round Power Cable, 2kV.

Cut to length - sold by the foot. Enter desired footage in QTY box.
Minimum 10' maximum 1000'. Please call for longer put ups.
Conductor:
6 thru 500 kcmil coated annealed copper, bunched wires, rope-lay-stranded per ASTM B172

Insulation:
Ethylene Propylene Rubber (EPR) insulation
Insulation Shield:
A flexible copper/textile braid shield is applied over non-conducting overlapped tape
Ground Check Conductor:
B172, insulated with high-strength yellow polypropylene
Grounding Conductors:
B172
Two conductors contact copper shield
Jacket:
Reinforced, two-layer, extra-heavy-duty, lead- cured Chlorinated Polyethylene (CPE)

Applications:
Designed use as trailing cables on AC mining equipment:
Where ground-check conductor required fail-safe monitoring
Bretby-type cable handling devices longwall shearers
induced voltages grounding system will not produce hazard
low- and medium-voltage circuits shielding or required
Features:
insulation provides shock hazard protection
Excellent heat, moisture, steam, oil, chemical radiation resistance
easy handling
Resists cutting, impact, abrasion, flame sunlight
thermal stability physical properties broad temperature range
Two-layer jacket reinforced provide protection from mechanical damage— cause of most portable failures

Compliances:
ICEA S75-381 Feeder mines similar applications
• Meets test requirements accepted listing MSHA
Approved Pennsylvania Department Environmental CAN/CSA-C22 .2 No . 96 certified Natural Resources Canada

Specifications*:

Size: 1/0 AWG
Number Conductors: 3
Conductor Strand: 259
Ground Size: 4
8
Nominal Thickness: 0.080 inches / 2.0 mm
Outside Diameter: 1.86 47.2 Current AMPS: 211
Net Weight: 2.765 lbs ft

*Data provided this page subject change based different manufacturers variances.