16-3C w/ Ground Shielded VFD Cable

XLPO Insulation, PVC Jacket, 600/1000V UL Type TC-ER, 90°C

Cut to length - sold by the foot. Enter desired footage in QTY box.
Minimum 50' maximum 1000'. Please call for longer put ups.

Applications:
Three Conductor Variable Frequency Drive Cables are primarily used with VFD’s. three construction is suitable applications that generally dry one-phase fault conditions, where an insulated ground not required.

Conductor:
Stranded tinned copper circuit conductors

Insulation:
Crossed-linked polyolefin (XLPO), flexible and low dielectric

Jacket:
Black polyvinyl chloride (PVC) jacket sunlight, moisture, oil abrasion resistant, direct burial rated. Rated use from -40°C 90°C

Shield:
Aluminum/Mylar/Aluminum tape 100% coverage & braid

Grounding Conductor:
3 Stranded conductors

Compliances:
• 1277, XHHW-2
• approved as 1000V motor supply cable listed VFD or WTTC per 2277 Wind Turbine Tray CSA FT-4 Vertical flame test AWM I/II A/B singles
•CSA standard C22.2 No. 210-11 c(UL) CIC-TC 239-09 230-09 Meets 1202/1583 70,000 BTU ICEA T-29-520 210,000 Class I Division II hazardous locations 90°C DRY/WET RoHS REACH compliant

Specifications*:

Size: 16 AWG
Number of Conductors: 3
Conductor Strand: 26
Insulation Thickness: 0.046 inches
Ground Wire: 20 AWG x 3
Jacket 0.050 inches
Outside Diameter: 0.442 inches

*Data provided on this page subject change based different manufacturers variances.