Prysmian Airguard Cable, 350 MCM 3 Conductor Type MV-105, 15kV, 133%, Medium Voltage Cable

Prysmian Airguard Cable, 350 MCM 3 Conductor Type MV-105, 15kV, 133%, Medium Voltage Cable

Cut to length - sold by the foot. Enter desired footage in QTY box.
Minimum 50' maximum 1000'. Please call for longer put ups.

Description:
Three cable with stranded copper conductors, extruded insulation system consisting of a thermosetting semiconducting shield, high dielectric strength EPROTENAX™ EPR insulation, helically applied bare tape cabled fillers and grounding overall binder tape, foamed polymeric layer superior mechanical protection, longitudinally aluminum oil hydrocarbon resistant layer, sunlight PVC jacket. Suitable Class I Division 2 locations
Application & Benefits:
Prysmian’s patented AIRGUARD™ is direct replacement continuously corrugated welded armored cables (*in 1 Div locations or if installed rated 1000V greater) 5X impact performance 2X-3X sidewall bearing pressure limit (@ 3000 lbs per rad-ft) This enables pulls than cables.

Conductors:
B Compact concentric strand soft drawn annealed ASTM

Insulation:
Natural EPR-based combined other materials agents that enhance electrical characteristics assuring extended life.
Conductor Shield:
shield which free stripping from bonded insulation.
Insulation controlled adhesion providing required balance between integrity ease stripping.
Metalic non-magnetic tape(s) over overlap 15%. Mylar ribbon under phase identification -1C w/Red, 1C w/Blue, w/Black.
Grounding Conductors:
conductor, one each interstice, UL, ICEA, ASTM.