Altronix T1RM3CK1 4-Door Altronix/Mercury Access and Power Integration Wired Rack Mount Kit

Altronix T1RM3CK1 is a 4-door access and power integration kit which includes Altronix sub-assemblies along with factory installed wire management assemblies that are pre-configured terminal blocks for Mercury hardware. This unit provides ample dual voltage outputs to support platform controllers locking devices. The accommodates one (1) Intelligent Reader Controller Interface Modules. Trove Plus simplifies field installations reliable, robust critical control most demanding applications. Also compatible these authentic partners:
AccessNsite, Avigilon, BadgePass, BluBox, Feenics, Genetec, Identicard, IMRON, Johnson Controls, Kastle, Keri Systems, LockState, Maxxess, Midpoint Security, NLSS, Open Options, Panasonic i-PRO MonitorCast, Quintron, RS2, S2 Schneider Electric, Vanderbilt.

Features

eFlow6NB Supply/Charger

Input

• Voltage: 120VAC, 60Hz, 3.5A
• Fusing: 5A / 250V

Output

• Voltage: 24VDC
• Current: 6A continuous
• Auxiliary: 1A (unswitched)
• Other: Overvoltage protection. Filtered regulated

Battery Charging

• Type: Sealed lead acid or gel type
• Fuse Rating: 10A @ 32V
• Failover: Upon AC loss, instantaneous
• (Batteries sold separately)

Supervision

• AC Failure: Form “C” contacts
• Battery: contacts
• Low DC Shutdown: Shuts down output terminals if battery drops below 70-75% 24V units (depending on supply). Prevents deep discharge

Indicators LED

• Input: 120VAC present
• DC Output: Powered
• Battery: Discharged not connected

PDS8 Distribution Module

Input

• Voltage: 24VDC from eFlow6NB 12VDC VR6
• Fusing: 32V

Outputs

• Voltage: 12 and/or 24VDC
• Any of eight (8) selectable follow Input 1 2
• Individual may be set OFF position servicing
• Fuses 3A 32V

Indicators (LED)

• DC individual LEDs
• Green: 12VDC
• Red: 24VDC

VR6 Regulator

Input

• Voltage: eFlow6NB

Output

• Voltage: 12VDC
• Current: continuous
• Other: Surge suppression

Indicators (LED)

• Input: present
• Output: Powered

ACM4 Controller

Input

• Voltage: eFlow6NB
• Fusing: 32V

Output

• Voltage: 24VDC
• Four (4) independently controlled fused outputs:
• a) Fail-Safe Fail-Secure outputs
• Relays rated 28VAC VDC 2.5A
• b) Auxiliary (unswitched)
• c) Any combination above
• Fuses (LED's)

Environmental

Temperature

Relative Humidity

BTU/Hr (approx.):