ComNet C2US Rack Mount Card Cage with Redundant Power

ComNet C2US Rack Mount Card Cage with two (2) 90-264 VAC 50/60 Hz Redundant Power Supplies. 19' (US AC Cord).

The C2 incorporates C1PS Supply units that provide redundancy the unlikely event of a failure. line cords (one per power supply module) are provided, allowing each to be connected separate uninterruptible supply, providing highest level reliability mission-critical applications. An audio alarm provides aural indication one modules has failed. design approach employed by ComNet for equipment mounted within model chassis unit modular supplies, elimination single-point failure major fault any module located rack. This is accomplished through use automatic electronic current limiting rack-mountable module, rather than which supports requirements nearly all competing designs, rack, results going into condition, and as result, shut down. eliminates possibility, only faulty shuts down, operation other continue unimpaired. feature also self-resetting, should or overload temporary intermittent condition. Furthermore, hot-swappable, so it not necessary power-down when removing replacing modules.

Benefits & Features

• Utilizes fault-tolerant configuration
• Automatic feature
• Failure relay (NO) local remote loss indication
• Audio failure
• Voltage transient protection on signal input/ output
• (12) twelve 1-inch slots available
• All hot-swappable
• LIMITED LIFETIME WARRANTY

Blank Filler Plates (Optional)