14 AWG THHN/THWN-2 Solid Building Wire - sold by the spool

10 Gauge THHN Solid Copper Building Wire. Sold by the spool.

Applications:
Type THHN/THWN-2 wire is intended for general purpose applications as defined National Electrical Code (NEC). Type THHN-THWN-2 permitted new construction or rewiring 600-volt applications. requiring THWN-2, conductor appropriate use in wet dry locations at temperatures not to exceed 90°C 75°C oil coolants. MTW 90°C, 60°C where exposed oils AWM 105°C locations.

Also Known As:
Copper wire, THWN, hook up conduit bathtub lighting nylon cable, etc...

Features:
Nylon outer jacket easy pulling. VW-1 rated 14 AWG - 8 AWG. All sizes are gasoline and oil-resistant II.

Jacket:
A tough, polyamide, covering per UL-1063 UL-83.

Standards:
Underwriters Laboratories Standards UL-83, UL-1063, UL-758
AWM Spec 1316, 1317, 1318, 1319, 1320, 1321
ASTM Stranding Class B3, B8, B787
Federal Specification A-A-59544
Canadian Association C22.2 No. 75
NEMA WC70/ICEA S-95-658
Institute of Electronics Engineers

Construction:
Conductors:
Solid, uncoated conductors ASTM-B3
Stranded, ASTM-B3, ASTM-B787 ASTM-B8
Insulation:
Color-coded Polyvinyl Chloride (PVC), heat moisture-resistant, flame-retardant compound UL-8

Specifications*:

Size: AWG
Stranding: Solid
Cross Section Area (mm2): 2.08
PVC Insulation Thickness (Conductor): 0.380 mm / 0.015 inches
Nylon Thickness: 0.100 0.004 inches
Outside Diameter: 2.57 0.101 inches
Allowable Ampacity: 15 Amps 60ºC 75ºC 90ºC

*Data provided on this page subject change based different manufacturers variances.