2-Port Ethernet over coax/CAT5e Transceiver. Provides IP video/data over coax up to 300m or CAT5e up to 500m @ 100mbps full duplex and supports PoE (IEEE 802.3af) or PoE+ (IEEE 802.3at) or Hi-PoE (60W). Use with eBridge100SPR, Pace1PRD, NetWay1D, any Midspan or Endspan. NEMA 4/4X/IP66-11 rated enclosure 9.5"H x 7.32"W x 4.92"D. UL/cUL Listed (UL60950-1). CE Approved.
eBridge200WPM PoE Ethernet transceiver/media converter transmits data and power over Coax or CAT5 cable over distances that are 3 to 5 times greater than standard Ethernet. Upgrading existing Coax analog camera infrastructure to IP cameras is greatly simplified as well. eBridge200WPM can support up to two PoE or PoE+ cameras/devices or a single Hi-PoE (60W) device. The eBridge200WPM/WPMH offers built-in IP management which allows for remote camera reset, monitoring and reporting via various IP protocols. There is no need to install remote AC mains power, since these devices are simply powered from the low voltage PoE midspan/endspan equipment, such as Altronix NetWay midspans or eBridge100SPR.
- Total output power: 60W
- Ethernet Connectivity: RJ45, auto-crossover
- Wire type: 4-pair CAT5 or better structured cable
Applications:
-Long range outdoor CAT5 or Coax PoE/PoE+/Hi-PoE.
-Retrofit digital IP cameras in an analog CCTV installation (up to two (2) IP cameras expansion per analog camera).
-Works with Megapixel, HD720, HD1080 and VGA (SD) cameras.
-Upgrade deployed CCTV Coax to a digital network in Retail, Hospitality, Arenas, Casinos, Airports, Schools, Hospitals, Transportation, etc.
Downloads
2-Port Ethernet over coax/CAT5e Transceiver. Provides IP video/data over coax up to 300m or CAT5e up to 500m @ 100mbps full duplex and supports PoE (IEEE 802.3af) or PoE+ (IEEE 802.3at) or Hi-PoE (60W). Use with eBridge100SPR, Pace1PRD, NetWay1D, any Midspan or Endspan. NEMA 4/4X/IP66-11 rated enclosure 9.5"H x 7.32"W x 4.92"D. UL/cUL Listed (UL60950-1). CE Approved.
eBridge200WPM PoE Ethernet transceiver/media converter transmits data and power over Coax or CAT5 cable over distances that are 3 to 5 times greater than standard Ethernet. Upgrading existing Coax analog camera infrastructure to IP cameras is greatly simplified as well. eBridge200WPM can support up to two PoE or PoE+ cameras/devices or a single Hi-PoE (60W) device. The eBridge200WPM/WPMH offers built-in IP management which allows for remote camera reset, monitoring and reporting via various IP protocols. There is no need to install remote AC mains power, since these devices are simply powered from the low voltage PoE midspan/endspan equipment, such as Altronix NetWay midspans or eBridge100SPR.
- Total output power: 60W
- Ethernet Connectivity: RJ45, auto-crossover
- Wire type: 4-pair CAT5 or better structured cable
Applications:
-Long range outdoor CAT5 or Coax PoE/PoE+/Hi-PoE.
-Retrofit digital IP cameras in an analog CCTV installation (up to two (2) IP cameras expansion per analog camera).
-Works with Megapixel, HD720, HD1080 and VGA (SD) cameras.
-Upgrade deployed CCTV Coax to a digital network in Retail, Hospitality, Arenas, Casinos, Airports, Schools, Hospitals, Transportation, etc.
Downloads
There are no reviews for this product.
No questions about this product.
