Altronix PACE4PRM 4-Port Long Range Ethernet over CAT5e Receiver

4-Port Long Range Ethernet over CAT5e Receiver. Transmits IP video/data over CAT5e up to 500m @ 100mbps full duplex and supports PoE (IEEE 802.3af) or PoE+ (IEEE 802.3at). Compatible with Pace1PTM transceiver. UL/cUL Listed (UL60950-1). CE Approved.

Pace4PRM is a long range Ethernet receiver that transmits data at 100mbps full duplex and power via CAT5e or higher cable in a PoE(+) compliant format. The Pace4PRM receiver is powered via a PoE midspan, such as the Altronix Netway series, or by an endspan. The receiver passes the PoE(+) compliant power over the cable to the Pace1PTM transceiver which in turn passes this power to an enabled IP camera/device. These plug and play units facilitate cost effective solutions for IP devices that need to be installed at the distances greater than 100m. They also provide a simple way to replace legacy analog products with new IP devices over structured cable.

• Powered by midspan or endspan
• PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W)
• Connectivity: four (4) RJ45 ports, auto-crossover
• Wire type: 4-pair CAT5e or 1 pair UTP structured cable
• Speed: 10/100BaseT, half/full duplex, auto negotiation PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W) delivered to camera by Pace1PTM. Power provided by Pace4PRM to Pace1PTM by PoE protocol.
• Throughput is rated to pass 100mbps of data at distances up to 450m. With proper headend equipment this supports Megapixel, HD720, HD1080

Applications:

Extend Network link distance in an industrial environment.

Works with Megapixel, HD720, HD1080 and VGA (SD) cameras.

Downloads

4-Port Long Range Ethernet over CAT5e Receiver. Transmits IP video/data over CAT5e up to 500m @ 100mbps full duplex and supports PoE (IEEE 802.3af) or PoE+ (IEEE 802.3at). Compatible with Pace1PTM transceiver. UL/cUL Listed (UL60950-1). CE Approved.

Pace4PRM is a long range Ethernet receiver that transmits data at 100mbps full duplex and power via CAT5e or higher cable in a PoE(+) compliant format. The Pace4PRM receiver is powered via a PoE midspan, such as the Altronix Netway series, or by an endspan. The receiver passes the PoE(+) compliant power over the cable to the Pace1PTM transceiver which in turn passes this power to an enabled IP camera/device. These plug and play units facilitate cost effective solutions for IP devices that need to be installed at the distances greater than 100m. They also provide a simple way to replace legacy analog products with new IP devices over structured cable.

• Powered by midspan or endspan
• PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W)
• Connectivity: four (4) RJ45 ports, auto-crossover
• Wire type: 4-pair CAT5e or 1 pair UTP structured cable
• Speed: 10/100BaseT, half/full duplex, auto negotiation PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W) delivered to camera by Pace1PTM. Power provided by Pace4PRM to Pace1PTM by PoE protocol.
• Throughput is rated to pass 100mbps of data at distances up to 450m. With proper headend equipment this supports Megapixel, HD720, HD1080

Applications:

Extend Network link distance in an industrial environment.

Works with Megapixel, HD720, HD1080 and VGA (SD) cameras.

Downloads