IP power over coax (camera end) media convertor with 1-port tp PoE-at. The IFS Power over Coax Media Converters from Interlogix are designed to transmit both Ethernet data and power transmission over coax cable up to 3,281 ft. (1Km). This solution provides a cost-effective way to reduce installation costs and increase ROI by utilizing existing coax to migrate an analog video system to an IP surveillance system.
The POC252-1CX-1P Power over Coax Media Converter is for use at the camera end to convert the data/power from the coax. The media converter provides 10/100Mbps data and IEEE 802.3-af/at compliant power on the RJ45 port for an IP camera.
Coax Ports
- 1 BNC ports
- IEEE 1901 standard compliant for power
- Wavelet-OFDM modulation
- 128-bit AES security encryption
- Daisy-chain (up to 4 devices on one link)
Ethernet Ports
- 10/100Mbps Ethernet
- Auto-negotiation and auto-MDI/MDI-X
- Half-duplex back pressure and IEEE802.3x full-duplex
- pause-frame fl ow control
Power over Ethernet
- IEEE 802.3-af/at compliant on RJ45 Ethernet port
- Up to 440W total power budget (dependent on switch model)
- Remote power up to 3,281 ft. (1Km) with RG6 75Ω coaxial cable
- Full PoE management - Total power budget control
- Power enable/disable per port - Power priority per port
- Power limitation per port - Power scheduling per port
- PD alive-checking
Downloads
IP power over coax (camera end) media convertor with 1-port tp PoE-at. The IFS Power over Coax Media Converters from Interlogix are designed to transmit both Ethernet data and power transmission over coax cable up to 3,281 ft. (1Km). This solution provides a cost-effective way to reduce installation costs and increase ROI by utilizing existing coax to migrate an analog video system to an IP surveillance system.
The POC252-1CX-1P Power over Coax Media Converter is for use at the camera end to convert the data/power from the coax. The media converter provides 10/100Mbps data and IEEE 802.3-af/at compliant power on the RJ45 port for an IP camera.
Coax Ports
- 1 BNC ports
- IEEE 1901 standard compliant for power
- Wavelet-OFDM modulation
- 128-bit AES security encryption
- Daisy-chain (up to 4 devices on one link)
Ethernet Ports
- 10/100Mbps Ethernet
- Auto-negotiation and auto-MDI/MDI-X
- Half-duplex back pressure and IEEE802.3x full-duplex
- pause-frame fl ow control
Power over Ethernet
- IEEE 802.3-af/at compliant on RJ45 Ethernet port
- Up to 440W total power budget (dependent on switch model)
- Remote power up to 3,281 ft. (1Km) with RG6 75Ω coaxial cable
- Full PoE management - Total power budget control
- Power enable/disable per port - Power priority per port
- Power limitation per port - Power scheduling per port
- PD alive-checking
Downloads
There are no reviews for this product.
No questions about this product.
