The Veracity VOR-ORL OUTREACH Lite PoE-powered Ethernet/ LAN Extender (100m ext. - no PoE out).
Ethernet is the ubiquitous technology for Local Area Network (LAN) installation, and the majority of networks in place use the 100BASE-T network standards. However, many security installations demand network connections that exceed the maximum 100 meters (328 feet) distance limit for wired Ethernet. OUTREACH Lite provides an instant solution to this restriction. Simply connect an OUTREACH Lite in line with the network cable - adding a Power over Ethernet (PoE) injector if required - to double the available range to 200 meters (656 feet).
Multiply your PoE network range
OUTREACH LITE let you instantly extend your Ethernet network installation beyond its 100 meter (328 foot) limit. Because it uses Power over Ethernet (PoE) technology, OUTREACH LITE can be easily fitted wherever network extension is required, with no need for a local power source.
Simple installation
OUTREACH Lite takes advantage of the universal 802.3af PoE standard, so it can draw its own power from the network connection. No local power is required, so OUTREACH Lite can be located exactly where it is needed. If your network switch has PoE, simply connect OUTREACH Lite up to 100 meters from the switch, and it will deliver another 100 meters' reach over regular Cat 5e or similar cable. If PoE is not available, the link can easily be upgraded using a low- cost PoE injector such as Veracity's OUTSOURCE.
No set-up or network configuration is required, as OUTREACH Lite automatically sets up network speed, duplex and crossover on connection, and does not require an IP or MAC address.
Go further
If PoE and network extension beyond 200 meters (656 feet) is required, Veracity's OUTREACH Max may be installed to extend Ethernet and PoE to OUTREACH Lite. For example, a 400 meter (1312 feet) connection between a PoE switch and another network device can be achieved by fitting two OUTREACH Maxes at 100 meter intervals along the cable, followed by an OUTREACH Lite. Unrestricted network connections up to 2.2 kilometers (1.4 miles) are possible, depending on configuration and PoE source. See the OUTREACH MAX XT data sheet.
No restrictions
Because OUTREACH Max and OUTREACH Lite simply restore the network connection every 100 meters, the full (200Mbit/s) bandwidth of 100BASE-T Ethernet is maintained across the entire link. This maximizes performance and transparency, with no risk of a reduced or unpredictable bandwidth, even at distances of several hundred meters or more.
Benefits & Features
- Instantly doubles cable range to 200 meters
- No local power required
- Full unrestricted network bandwidth
- Universal 10/100 compatibility
- PoE powered device
Downloads
The Veracity VOR-ORL OUTREACH Lite PoE-powered Ethernet/ LAN Extender (100m ext. - no PoE out).
Ethernet is the ubiquitous technology for Local Area Network (LAN) installation, and the majority of networks in place use the 100BASE-T network standards. However, many security installations demand network connections that exceed the maximum 100 meters (328 feet) distance limit for wired Ethernet. OUTREACH Lite provides an instant solution to this restriction. Simply connect an OUTREACH Lite in line with the network cable - adding a Power over Ethernet (PoE) injector if required - to double the available range to 200 meters (656 feet).
Multiply your PoE network range
OUTREACH LITE let you instantly extend your Ethernet network installation beyond its 100 meter (328 foot) limit. Because it uses Power over Ethernet (PoE) technology, OUTREACH LITE can be easily fitted wherever network extension is required, with no need for a local power source.
Simple installation
OUTREACH Lite takes advantage of the universal 802.3af PoE standard, so it can draw its own power from the network connection. No local power is required, so OUTREACH Lite can be located exactly where it is needed. If your network switch has PoE, simply connect OUTREACH Lite up to 100 meters from the switch, and it will deliver another 100 meters' reach over regular Cat 5e or similar cable. If PoE is not available, the link can easily be upgraded using a low- cost PoE injector such as Veracity's OUTSOURCE.
No set-up or network configuration is required, as OUTREACH Lite automatically sets up network speed, duplex and crossover on connection, and does not require an IP or MAC address.
Go further
If PoE and network extension beyond 200 meters (656 feet) is required, Veracity's OUTREACH Max may be installed to extend Ethernet and PoE to OUTREACH Lite. For example, a 400 meter (1312 feet) connection between a PoE switch and another network device can be achieved by fitting two OUTREACH Maxes at 100 meter intervals along the cable, followed by an OUTREACH Lite. Unrestricted network connections up to 2.2 kilometers (1.4 miles) are possible, depending on configuration and PoE source. See the OUTREACH MAX XT data sheet.
No restrictions
Because OUTREACH Max and OUTREACH Lite simply restore the network connection every 100 meters, the full (200Mbit/s) bandwidth of 100BASE-T Ethernet is maintained across the entire link. This maximizes performance and transparency, with no risk of a reduced or unpredictable bandwidth, even at distances of several hundred meters or more.
Benefits & Features
- Instantly doubles cable range to 200 meters
- No local power required
- Full unrestricted network bandwidth
- Universal 10/100 compatibility
- PoE powered device
Downloads
There are no reviews for this product.
No questions about this product.
