Altronix eBridge1ST EoC and PoE/PoE+ Transceiver

eBridge1ST EoC transceiver transmits data at 25Mbps Coax cable a paired eBridge receiver and provides power in PoE+ compliant format an enabled device/camera. The is available various options (see compatibility list below/Altronix.com), including built-in midspan, for use with external such as Altronix Netway series facilitate network applications. passes same eBridge1ST transceiver, which, turn this IP camera/device. These plug play units cost-effective solutions devices. They can be installed distances greater than 500m. provide simple way replace legacy analog products new devices existing coax.

Applications

• Retrofit cameras CCTV installation.
• Works Megapixel non cameras.
• Extend link distance industrial environment 610m.
• Upgrade deployed Retail, Casinos, Airports, Schools, Hospitals, etc.

Input

• PoE IEEE 802.3af (15W) and PoE+ 802.3at (30W) from receivers.

Compatible Receivers

• eBridge1PCRM, eBridge4PCRM, eBridge8PCRM, eBridge16PCRM, eBridge1PCR, eBridge1PCRX, eBridge4PCRX, eBridge8PCRX, eBridge16PCRX.

Ethernet

• Connectivity: RJ45, auto-crossover.
• Wire 4-pair CAT5.
• Distance: up 500m.
• Speed: 10/100BaseT, auto negotiation. PoE PoE+ compliant delivered camera by eBridge1ST. provided by receiver to protocol.
• Throughput rated pass 500m.

Coax Link

• Distance: 500m delivery.
• Connectivity: BNC, RG-59/U similar.

LED Indicators

• Yellow ON (by respective RJ45 jack).
• Yellow Green LED (RJ45) status, 10/100Base-T/active.
• Blue: active.

Environmental

• Operating Temperature: 15W -40 F 167 (-40 C 75 C). 25W 140 60 C).
• Storage C).
• Humidity: 20 85%, non-condensing.

Functions

• Auto detection protection non-PoE cameras/devices.