ABB 1SVR427032R1000 DIN Mount Power Supply 85-264V AC/90-375V DC Input 12 V DC/2.5 A Output

Applications

For Used Worldwide In High Fluctuating Networks And Battery-Powered Plants

Features

• Output voltage adjustable via front-face rotary potentiometer
• Adjust Rated output current 2.5 A
• Typical efficiency of 84%
• Low power dissipation and low heating
• Free convection cooling (no forced cooling with ventilators)
• Ambient temperature range dug operation Minus 40 - 70 deg C
• Open-circuit, overload and short-circuit stable
• Integrated input fuse
• LEDs for status indication
• The primary switch mode power supply offers two voltage input ranges. This enables the supply with AC or DC
• Equipped witwo generous capacitors, which ensure mains buffering of at least 75 usec (At 230 V AC)

Specification Description

Voltage Rating: Input: 85 - 264 V AC/90 - 375 V DC, Output: 24 V DC
Amperage Rating: Input: 560 mA At 115 V AC, 330 mA At 230 V AC, Output: 2.5 A At Less Than Or Equal To 60 deg C
Wattage: 30 W
Frequency Rating: 47 - 63 Hz
Phase: 1 PH
Fuse Rating: 2At 250 V AC Slow Acting
Material: Plastic Housing
Efficiency: 84 %
Insulation: Rated Insulation Voltage Ui: Input/Output - 3 kV AC, Input/PE - 1.5 kV AC
Cable Size: Fine Strand With/Without Wire End Ferrule And Rigid: 24 - 14 AWG (Input/Output)
Enclre: IP20
Environmental Conditions: Operating Temperature: -40 To 70 deg C, Rated Load: -40 To 60 deg C, Storage Temperature: -40 To 85 deg C, Damp Heat: 95 % RH, Without Condensation
Width: 40.5 mm
Height: 90 mm
Depth: 114 mm
Power Failure Bufferingme: 20 msec At 115 V AC, 30 msec At 230 V AC
Discharge Current: Input/Output: 0.25 mA, Input/PE: 3.5 mA
Control Time: Less Than 2 msec
Power Consumption: 35.9 W
Tightening Torque: 0.6 N-m
Inrush Current Limiting: 20 A At 115 V AC, 40 A At 230 V AC
Strip Length: 6 mm
Rise Time: 150 msec At Rated Load, 500 msec With 3500 uF
Capacitive Load: 3500 uF

Tech Info

C/US UL 508, 1310, 60950 Listed, CAN/CSA C22.2, CE, GOST Certified, IEC/EN 61204, EN 50178, EN 60950, IEC/CISPR 22, EN 55022: Class B Approved, RoHS Compliant