Spec Sheet
Features
- Rated output current 1.3 A
- Efficiency of typical 83%
- Low power dissipation and low heating
- Free convection cooling (no forced cooling with ventilators)
- Ambient temperature range during operation Minus 40 - 70 deg C
- Open-circuit, overload and short-circuit stable
- Integrated input fuse U/I characteristic (fold-forward behaviour at overload - no switch-off)
- LEDs for status indication
- Structural form ideal for installation in distribution panels
- Light-grey enclosure in RAL 7035
Specification Description
Voltage Rating: Input: 90 - 264 V AC/210 - 370 V DC, Output: 24 V DC
Amperage Rating: Input: 600 mA At 115 V AC, 344 mA At 230 V AC, Output: 1.3 A At Less Than Or Equal To 60 deg C
Wattage: 30 W
Frequency Rating: 47 - 63 Hz
Phase: 1 PH
Fuse Rating: At 250 V AC Slow Acting
Material: Plastic Housing
Efficiency: 83 %
Insulation: Rated Insulation Voltage Ui: Input/Output - 3 kV AC
Cable Size: Fine Strand With/Without Wire End Ferrule And Rigid: 24 - 14 AWG (Input/Output)
Enclosure: IP20
Environml Conditions: Operating Temperature: -40 To 70 deg C, Rated Load: -40 To 60 deg C, Storage Temperature: -40 To 85 deg C, Damp Heat, Cyclic: (4) 24 HR Cycles, 40 deg C, 95 % RH
Width: 53 mm
Height: 91 mm
Control Time: Less Than 1 msec
Current Limitingt Short Circuit: 4.2 A
Power Failure Buffering Time: 30 msec
Rise Time: 1 msec
Tightening Torque: 0.36 - 0.56 N-m
Inrush Current Limiting: 50 A At 230 V AC
Wire Strip Length: 6 mm
Power Consumption: 37.92 W At 110 V AC, 38.16 W At 230 V AC
Depth: mm
Tech Info
C/US UL 508, 1310, 60950 Listed, CAN/CSA C22.2, CE, GOST Certified, IEC/EN 61204, EN 50178, EN 60950, IEC/CISPR 22, EN 55022: Class B Approved, RoHS Compliant
Technical
There are no reviews for this product.
No questions about this product.
