2/0 Type MV-90, 2.4kV, EPR/CPE Unshielded Power Cable

Cut to length - sold by the foot. Enter desired footage in QTY box.
Minimum 50' maximum 1000'. Please call for longer put ups.

Applications:
use power circuits up 2,400 V where shields cannot be properly terminated and space is limited. Cable used applications chemical plants, refineries, steel mills, industrial utility substations generating stations. Ideally suited increased durability required.

Jacket:
TS CPE Thermoset Chlorinated Polyethylene

Standards:
Listed Type MV-90 per UL 1072 wet dry locations. Meets requirements of ICEA S-96-659 (NEMA WC71). Sizes 1/0 larger marked Sunlight Resistant pass IEEE 383 70,000 Btu/hr flame test are "for CT use"

Conductors:
Class B stranded, annealed, bare copper ASTM B-3 B-8, strand shield an extruded semiconducting compound WC71)

Insulation:
Ethylene Propylene Rubber (EPR) which or exceeds 1072. locations NEC Article 328

Ampacity:
Based on three single conductor cables isolated conduit air Table 310.73 with a temperature 90°C ambient 40°C

Temperature: 90°C

Voltage: 2,400V

Specifications*:

Size: 2/0 AWG
Number Strands: 19
Insulation Thickness: 0.125 inches
Jacket 0.080 Outside Diameter: 0.880 Weight: 0.700 lbs ft
Amps Conductor: 205 amps

*Data provided this page subject change different manufacturers variances.