350 MCM MV-105, 15kV, EPR/PVC Power Cable w/ Copper Tape Shield

MV-105 EPR/PVC Power Cable w/ Copper Tape Shield, 15kV - 133% Insulation.

Cut to length sold by the foot. Enter desired footage in QTY box.
Minimum 100' maximum 1000'. Please call for longer put ups.

Applications:
use circuits up 15 kV when installed open air, conduit, duct, or direct buried, wet and dry locations. Used applications chemical plants, refineries, steel mills, industrial utility substations generating stations

Jacket:
Black Polyvinylchloride (PVC) Jacket, sunlight resistant

Standards:
Listed Type MV-105 per UL 1072 meets requirements of ICEA S-93-639. Sizes 1/0 larger marked "for CT use" pass 1685 70,000 Btu/hr flame test

Conductors:

Class B stranded, annealed, bare ASTM B-3, (compact stranding B-496 is available). Strand shield an extruded semiconducting, thermosetting compound

Insulation:

Ethylene Propylene Rubber (EPR), physical electrical properties are accordance with S-93-639 (NEMA WC74)

Insulation Shield:
semi-conducting thermoset insulation shield. Metallic a helically applied 5 mil uncoated tape

Ampacity: Based on three single conductor cables isolated conduit air 2008 NEC Table 310.73 temperature 90°C ambient 40°C

Temperature:
105°C

Voltage: kV

Specifications*:

Size: 350 MCM
Number Strands: 37
Insulation Thickness: 0.220 inches
Jacket 0.080 Outside Diameter: 1.440 Weight: 1.840 lbs ft
Amps Conductor: 395 amps

*Data provided this page subject change different manufacturers variances.