500 MCM Aluminum MV-105, 15kV, EPR/PVC Power Cable w/ Copper Tape Shield
Cut to length - sold by the foot. Enter desired footage in QTY box.
Minimum 100' maximum 1000'. Please call for longer put ups.
Applications:
use aerial, direct burial, tray, conduit, and underground duct installations as permitted National Electric Code. is capable of operating continuously with a conductor temperature not exceed 105⁰C normal operation, 140⁰C emergency overload conditions, 250⁰C short circuit conditions. It rated at 15,000V 133% insulation level (ungrounded system). sidewall pressure 1000 lbs. This does require pulling lubricant.
Jacket:
Sunlight resistant PVC per ICEA S-97-682, average thickness accordance Table 7-3 ICEA.
Standards:
UL 1685 – 1/0 larger, UL-CT Flame Exposure Test • 1072 Medium Voltage Cables S-93-639 (NEMA WC74) S=46kV Shielded fo Transmission Distribution Electrical Energy
Conductors:
8000 series compact ASTM specs B800and B801 part 2, Section 2.1 2.5.
Insulation:
Ethylene propylene rubber (EPR) nominal 0.220
Insulation Shield:
Extruded layer semi-conducting thermosetting material which shall be identified being semiconducting. Over will applied helically wrapped 5-mil 25% overlap.
Flame Tests: Test
Voltage:
15 kV
Specifications*:
Size: 500 MCM
Min Jacket Thickness: 0.07 inches
Outside Diameter: 1.457 Weight: 1.217 lbs ft
Ampacity: Duct = 400 amps Conduit air 430 amps
*Data provided on page subject change based different manufacturers variances.
There are no reviews for this product.
No questions about this product.
