Altronix NetWaySP41BTPL supports up to 90W per port (240W total power) for deploying the latest high-powered IP devices in remote locations. It is equipped with two (2) 1Gb SFP ports to transmit data at long distances and four (4) 802.3bt compliant Ethernet ports. NetWaySP41BTPL accommodates single/multi-mode fiber or composite cable (fiber+copper) to simultaneously deliver power and data from NetWay Spectrum headend media converters/injectors.
Features
Input
- Voltage: 115VAC, 60Hz, 1.8A or 230VAC, 50/60Hz, 1A
- Fusing: 5A/250V
Power Output
Maximum Power:
- Four (4) PoE ports rated at 90W each, 240W total power
- IEEE 802.3af (15W), IEEE 802.3at (30W), IEE 802.3bt (90W) compliant
- Integral surge protection
SFP Ports
- Two (2) Gigabit SFP port
Ethernet Ports
- Four (4) 10/100/1000 Mbps ports
- Connectivity: RJ45, auto-crossover
- Wire type: 4-pair CAT5e or higher structured cable
- Speed: 10/100/1000 Mbps, half/full duplex, auto negotiation
Back-up Battery (not included)
- Type: 24VDC charging circuit charges LiFePO4 (Lithium Iron Phosphate) or sealed lead acid or gel type batteries (require separate ventilated enclosure)
- Failover: Upon AC loss, instantaneous
Indicators (LED)
- Individual PoE On LEDs for each port
- Individual IP Link status, 10/100/1000 Base-T/active LEDs for each port
- ALOS LED indicates fiber connection for SFP port
- Heartbeat LED indicates proper operation of the unit
Temperature
- Operating (240W): –40ºC to 55ºC (–40ºF to 131ºF)
- Operating (180W): -40ºC to 65ºC (-40ºF to 149ºF)
- Operating (150W): -40ºC to 75ºC (-40ºF to 167ºF)
- Storage: -40ºC to 85ºC (-40ºF to 185ºF)
- Relative Humidity: 85% +/-5%
Operating Altitude
- - 304.8 to 2,000m
Mounting hardware is included
Downloads
NETWAYSP41BTPL-Specsheet
NETWAYSP41BTPL-Installation-Instructions
Altronix NetWaySP41BTPL supports up to 90W per port (240W total power) for deploying the latest high-powered IP devices in remote locations. It is equipped with two (2) 1Gb SFP ports to transmit data at long distances and four (4) 802.3bt compliant Ethernet ports. NetWaySP41BTPL accommodates single/multi-mode fiber or composite cable (fiber+copper) to simultaneously deliver power and data from NetWay Spectrum headend media converters/injectors.
Features
Input
- Voltage: 115VAC, 60Hz, 1.8A or 230VAC, 50/60Hz, 1A
- Fusing: 5A/250V
Power Output
Maximum Power:
- Four (4) PoE ports rated at 90W each, 240W total power
- IEEE 802.3af (15W), IEEE 802.3at (30W), IEE 802.3bt (90W) compliant
- Integral surge protection
SFP Ports
- Two (2) Gigabit SFP port
Ethernet Ports
- Four (4) 10/100/1000 Mbps ports
- Connectivity: RJ45, auto-crossover
- Wire type: 4-pair CAT5e or higher structured cable
- Speed: 10/100/1000 Mbps, half/full duplex, auto negotiation
Back-up Battery (not included)
- Type: 24VDC charging circuit charges LiFePO4 (Lithium Iron Phosphate) or sealed lead acid or gel type batteries (require separate ventilated enclosure)
- Failover: Upon AC loss, instantaneous
Indicators (LED)
- Individual PoE On LEDs for each port
- Individual IP Link status, 10/100/1000 Base-T/active LEDs for each port
- ALOS LED indicates fiber connection for SFP port
- Heartbeat LED indicates proper operation of the unit
Temperature
- Operating (240W): –40ºC to 55ºC (–40ºF to 131ºF)
- Operating (180W): -40ºC to 65ºC (-40ºF to 149ºF)
- Operating (150W): -40ºC to 75ºC (-40ºF to 167ºF)
- Storage: -40ºC to 85ºC (-40ºF to 185ºF)
- Relative Humidity: 85% +/-5%
Operating Altitude
- - 304.8 to 2,000m
Mounting hardware is included
Downloads
NETWAYSP41BTPL-Specsheet
NETWAYSP41BTPL-Installation-Instructions
There are no reviews for this product.
No questions about this product.
