Comnet CNFE4SMSPOE 4-Port 10/100 Mbps Ethernet Self-managed Switch with PoE+ on Ports 1--4.
The ComNet CNFE4SMSPOE is a four-port self-managed Ethernet switch with uplink management functionality. It provides 4 ports operating at 10/100Mbps and is designed to combine Ethernet data from the three electrical ports into a fourth electrical port and forward that data to the next network device. There is no programming required to use this product. The ComNet CNFE4SMSPOE comes pre-programmed, preventing network video flooding with a switch selection that allows the switch to be used as an uplink or as an unmanaged switch. All four ports can supply up to thirty (30) watts of power ("Power over Ethernet") and incorporate PoE+ features based on the IEEE 802.3at standard. It is "Plug-and-Play" easy to use. LED indicators confirm the operating status of this device. The ComNet CNFE4SMSPOE may be either wall mounted, rack mounted ("ComFit" packaging) or DIN-rail mounted with the use of the ComNet DINBKT1 adaptor plate.
Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high- line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
What are Self-managed Switches?
the ComNet Self-Managed Switch Series are a line of switches that allow incoming Ethernet data to be electrically or optically forwarded to another Ethernet device. The ComNet self-managed switch series with uplink management functionality is designed to combine data from the electrical ports to the last electrical or optical port and forwards this data to the next network device. There is no programming required to use this product.
Features & Benefits
- No programming required
- 10/100 Mbps Ethernet
- 4 x 10/100 BASE-T/TX electrical ports supporting PoE+
- Electrical ports support Auto-Negotiation for 10/100 Mbps, full -or half -duplex data.
- Pre-programmed port for uplink to other Ethernet devices
- Automatic MDI/MDI-X crossover
- Voltage transient protection on all power and signal input/ output lines
- Power and Activity status LED indicators
- Hot-swappable rack modules
- Interchangeable between stand-alone or rack mount use -- ComFit
- IEEE 802.3 compliant
- LIMITED LIFETIME WARRANTY
Required Power Supplies
- PS48VDC-5A Power Supply for PoE Applications (Not Included)
Downloads
Comnet CNFE4SMSPOE 4-Port 10/100 Mbps Ethernet Self-managed Switch with PoE+ on Ports 1--4.
The ComNet CNFE4SMSPOE is a four-port self-managed Ethernet switch with uplink management functionality. It provides 4 ports operating at 10/100Mbps and is designed to combine Ethernet data from the three electrical ports into a fourth electrical port and forward that data to the next network device. There is no programming required to use this product. The ComNet CNFE4SMSPOE comes pre-programmed, preventing network video flooding with a switch selection that allows the switch to be used as an uplink or as an unmanaged switch. All four ports can supply up to thirty (30) watts of power ("Power over Ethernet") and incorporate PoE+ features based on the IEEE 802.3at standard. It is "Plug-and-Play" easy to use. LED indicators confirm the operating status of this device. The ComNet CNFE4SMSPOE may be either wall mounted, rack mounted ("ComFit" packaging) or DIN-rail mounted with the use of the ComNet DINBKT1 adaptor plate.
Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high- line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
What are Self-managed Switches?
the ComNet Self-Managed Switch Series are a line of switches that allow incoming Ethernet data to be electrically or optically forwarded to another Ethernet device. The ComNet self-managed switch series with uplink management functionality is designed to combine data from the electrical ports to the last electrical or optical port and forwards this data to the next network device. There is no programming required to use this product.
Features & Benefits
- No programming required
- 10/100 Mbps Ethernet
- 4 x 10/100 BASE-T/TX electrical ports supporting PoE+
- Electrical ports support Auto-Negotiation for 10/100 Mbps, full -or half -duplex data.
- Pre-programmed port for uplink to other Ethernet devices
- Automatic MDI/MDI-X crossover
- Voltage transient protection on all power and signal input/ output lines
- Power and Activity status LED indicators
- Hot-swappable rack modules
- Interchangeable between stand-alone or rack mount use -- ComFit
- IEEE 802.3 compliant
- LIMITED LIFETIME WARRANTY
Required Power Supplies
- PS48VDC-5A Power Supply for PoE Applications (Not Included)
Downloads
There are no reviews for this product.
No questions about this product.
