Serial Digital Dialer-No Housing Comes with 2- 7' Phone Patch Cords. Requires PSR-24/2.5 Power Supply. The Alpha Communications® / Keltron SDACT-2 is a unique solution that interfaces with emergency-call, access control, building management and other systems to enable an appropriate and instantaneous response from personnel at a central or remote monitoring location. The SDACT-2 provides a bridge to an on- or off-site central station-style digital receiver through the dial-up public switched telephone network (PSTN). The SDACT-2 accepts pre-defined ASCIII RS232 data strings and converts to SIA, a standard, digital receiver-compatible, alarm reporting format. The most common applications for the SDACT-2 is for use with our AlphaEntry™ and AlphaEcall™ emergency-call systems and devices, although it can be used with other similar systems.
- RS232 Port enables accurate monitoring of event type and location identification
- Test code call-in cycles are programmable. A manual test button is also included
- Transmits signals in industry standard SIA format
- Works with a variety of alarm notification equipment
- Zones 1-4 supervised EOL, suitable for fault-contact monitoring
- Zones 5-7 are available for loss of AC and battery fail indications, which are also reported using standard SIA event codes
- Local LEDs and audible devices clearly indicate Serial Dialer status
Downloads
Serial Digital Dialer-No Housing Comes with 2- 7' Phone Patch Cords. Requires PSR-24/2.5 Power Supply. The Alpha Communications® / Keltron SDACT-2 is a unique solution that interfaces with emergency-call, access control, building management and other systems to enable an appropriate and instantaneous response from personnel at a central or remote monitoring location. The SDACT-2 provides a bridge to an on- or off-site central station-style digital receiver through the dial-up public switched telephone network (PSTN). The SDACT-2 accepts pre-defined ASCIII RS232 data strings and converts to SIA, a standard, digital receiver-compatible, alarm reporting format. The most common applications for the SDACT-2 is for use with our AlphaEntry™ and AlphaEcall™ emergency-call systems and devices, although it can be used with other similar systems.
- RS232 Port enables accurate monitoring of event type and location identification
- Test code call-in cycles are programmable. A manual test button is also included
- Transmits signals in industry standard SIA format
- Works with a variety of alarm notification equipment
- Zones 1-4 supervised EOL, suitable for fault-contact monitoring
- Zones 5-7 are available for loss of AC and battery fail indications, which are also reported using standard SIA event codes
- Local LEDs and audible devices clearly indicate Serial Dialer status
Downloads
There are no reviews for this product.
No questions about this product.
