The Viking model PA-IP SIP / Multicast Paging Adapter provides an interface between new VoIP phone systems (hardware or hosted / cloud based) and analog paging systems, eliminating the need for an ATA or FXS port. The PA-IP can be used for standard SIP endpoint paging or multicast paging and background music. The unit easily connects with a single CAT5/6 cable from your PoE switch. An auxiliary trigger input allows an optional hard wired switch or phone system trigger output to enable loud ringing / night bell from after hour incoming calls. Line-level audio output connections are provided for connecting to an external amplifier. A built-in 6 Watt class D amplifier with speaker output connections is also provided to drive up to 6 analog 8 Ohm speakers. A programmable relay output is provided for triggering external amplifiers, etc.
Features
- PoE powered (class 3,
- Paging prioritization
- Plays audio from multicast
- SIP endpoint or multicast group member
- Supports up to 10 multicast paging groups
- Red "Page / Status" LED indicator
- SIP compliant (see product manual for list of compatible IP-PBX phone systems)
- Network downloadable firmware
- Auto provisioning via Viking programming software
- Built-in high efficiency 6 watt class D amplifier
- Relay for activating door locks, strobe lights, external amplifiers, etc.
- SIP / Multicast: SIP page, SIP page and zoned multicast stream, zoned Multicast receive
- Support for access code to prevent unwanted SIP calls
- Line-level audio output for connecting to an external amplifier
- Network remote volume control
- Can drive up to 6 external analog 8 Ohm speakers
- Diagnostics (for testing the relay)
Downloads
PA-IP-Manual
PA-IP-Quick-Start-Guide
The Viking model PA-IP SIP / Multicast Paging Adapter provides an interface between new VoIP phone systems (hardware or hosted / cloud based) and analog paging systems, eliminating the need for an ATA or FXS port. The PA-IP can be used for standard SIP endpoint paging or multicast paging and background music. The unit easily connects with a single CAT5/6 cable from your PoE switch. An auxiliary trigger input allows an optional hard wired switch or phone system trigger output to enable loud ringing / night bell from after hour incoming calls. Line-level audio output connections are provided for connecting to an external amplifier. A built-in 6 Watt class D amplifier with speaker output connections is also provided to drive up to 6 analog 8 Ohm speakers. A programmable relay output is provided for triggering external amplifiers, etc.
Features
- PoE powered (class 3,
- Paging prioritization
- Plays audio from multicast
- SIP endpoint or multicast group member
- Supports up to 10 multicast paging groups
- Red "Page / Status" LED indicator
- SIP compliant (see product manual for list of compatible IP-PBX phone systems)
- Network downloadable firmware
- Auto provisioning via Viking programming software
- Built-in high efficiency 6 watt class D amplifier
- Relay for activating door locks, strobe lights, external amplifiers, etc.
- SIP / Multicast: SIP page, SIP page and zoned multicast stream, zoned Multicast receive
- Support for access code to prevent unwanted SIP calls
- Line-level audio output for connecting to an external amplifier
- Network remote volume control
- Can drive up to 6 external analog 8 Ohm speakers
- Diagnostics (for testing the relay)
Downloads
PA-IP-Manual
PA-IP-Quick-Start-Guide
There are no reviews for this product.
No questions about this product.
