The ComNet CNFE1002M1A Fast Ethernet over Optical Fiber Media Converter (A), ST Connector, 1310/1550nm Multi Mode (MM), 1 fiber.
Description
The ComNet converter is designed to transmit and receive Mbps data fiber. The electrical interface will Auto-Negotiate a 10 Mbps, or 100 rate without any adjustments. operates at rate. This environmentally hardened operate in extreme temperatures. LED indicators are provided for rapidly ascertaining equipment operating status. Packaged exclusive ComFit housing, standard size units may be either wall rack-mounted, DIN-rail mounted by addition of DINBKT1 adaptor plate.
Designed meet full compliance with environmental requirements (ambient temperature, mechanical shock, vibration, humidity condensation, high-line/low-line voltage conditions transient protection) NEMA TS-1/TS-2 Caltrans Specification Traffic Signal Control Equipment.
Features
- 10/100 BASE-T/TX port
- 100 BASE-FX port
- Electrical port supports Auto-Negotiation full/half duplex data
- Optical data
- Automatic MDI/MDI-X crossover
- Distances up to: 3 km (2 miles) Multimode
- Transparent encoding/compatible major protocols
- ST connectors
- 1 design
- DC-only powered
- Voltage protection on all power input/output lines
- No in-field adjustments required
- LED Indicators
- Standard interchangeable between stand-alone rack mount use -- ComFit
- IEEE 802.3 compliant
- ComNet limited lifetime warranty
Optional Card Cages
- ComNet C1US Cage Supply
- ComNet C2US Redundant Power
Related Converter
- ComNet CNFE1002M1B (1550/1310nm)
Downloads
CNFE100(X) Sheet (Size: 161.5 KB) User Manual 93.1There are no reviews for this product.
No questions about this product.
