The ComNet CNFE1003M2 Fast Ethernet to Optical Fiber Media Converter, SC Connector, Multi Mode, 2 Fiber.
Description
The ComNet converter is designed transmit and receive Mbps data over mode fiber. The electrical interface will Auto-Negotiate a 10 Mbps, or 100 rate without any adjustments. operates at rate. This environmentally hardened to operate in extreme temperatures. LED indicators are provided for rapidly ascertaining equipment operating status. Packaged exclusive ComFit housing, standard size units may be either wall rack-mounted, DIN-rail mounted by addition of DINBKT1 adaptor plate.
Designed meet full compliance with environmental requirements (ambient temperature, mechanical shock, vibration, humidity condensation, high-line/low-line voltage conditions transient protection) NEMA TS-1/TS-2 Caltrans Specification Traffic Signal Control Equipment.
Features
- 10/100 BASE-T/TX port
- 100 BASE-FX port
- Electrical port supports Auto-Negotiation full/half duplex data.
- Optical data
- Automatic MDI/MDI-X crossover
- Distances up to: 3 km (2 miles) mode
- Transparent encoding/compatible major protocols
- SC connector
- 2 design
- Voltage protection on all power input/output lines
- No in-field adjustments required
- LED status indicators
- Interchangeable between stand-alone rack mount use -- ComFit
- IEEE 802.3 compliant
- Lifetime Warranty
Optional Mounting Hardware
- ComNet C1US Card Cage Supply
- ComNet C2US Redundant Power
Related Converters
- ComNet CNFE1003S2 (Single Mode)
Downloads
CNFE100(X) Sheet (Size: 161.5 KB) User Manual 93.1There are no reviews for this product.
No questions about this product.
