Comnet CNFE2003S2PoE/M 2 Fiber 2 Channel 100 Mbps Media Converter

2TX TO 1 FX Small Size 100Mbps Media Converter, SC Connector, AC/DC Power, sm, 2 fiber, 48V POE,  Power Supply Included. 30w output.

The ComNet Ethernet CNFE2003S2PoE/M converter is two-channel electrical optical converter. This auto-negotiating device accept two Mbps inputs and convert a 100 output. single-mode fibers connector. The exclusive Demux feature allows for port isolation, replicating converters over one fiber. Mux prevents network video flooding of multicast traffic with DIP switch selection fiber as dedicated uplink path. series can be powered by wide range AC or DC input while unit meet 802.3at standard provide 30 watts PoE+ power.

• 30W on ports 2
• 10/100 Ethernet
• 2 × BASE-T/TX ports
• 100 BASE-FX port
• Electrical support Auto-Negotiation 10 Mbps, full duplex half data
• Optical supports data
• Automatic MDI/MDI-X crossover
• Distances up to: 20 km (12 mi) Mode
• SC connector
• 2 design
• Voltage transient protection all power signal input/output lines provides from surges other voltage events
• No in-field adjustments required
• Full units contact closure output remote side link failure detection
• Standard hot-swappable rack module
• Standard interchangeable between stand-alone mount use – ComFit
• IEEE 802.3 compliant