Comnet FDC10S1B Small Size Bi-directional Contact Closure Transceiver

Bi-directional Contact Closure Transceiver, sm, fiber, Small Size.

The ComNet FDC10 Series bi-directional transceiver provides of over one multimode or mode optical fiber. The has a input and 0.5 amp output. module two relay outputs input. output follows 'relay input' at remote end. When is shorted, local closed vice-versa. second 'carrier' detected from end, this indicates that fiber connected end power operating.

• Transceiver: 1550/1310 nm
• Maximum Distance: 69 km (43 miles)
• Single Mode: 9/125μm
• Transmits in directions
• 30 VDC, output, normally open
• Point-to-Point architecture
• Designed to meet full compliance with environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity condensation, high-line/lowline voltage conditions transient protection) NEMA TS-1/TS-2 Caltrans Specification for Traffic Signal Control Equipment
• Plug-and-play design ensures ease installation requiring no electrical adjustments
• Relay Carrier Detect (normally present)
• Automatic resettable solid-state current limiters
• Voltage protection on all input/ lines surges other events
• FDC10(M,S)1(A,B) models are housed smaller-sized package stand-alone mounting only, use those applications where space may be limited
• Indicating LEDs provided confirming equipment status. position (open RED GREEN) indicated by separate bi-color indicators each relay