TRANSITION NETWORKS TN-SFP-LX1 Gigabit Ethernet Small Form Factor Pluggables with DMI 1000BASE-LX 1310 nm single-mode LC [10 km/6.2 miles]

Features

• Extend Network Distance
• Bridge legacy 10/100 devices to a Gigabit backbone
• Auto-Negotiation (copper and fiber ports)
• Switch Selectable Speeds (UTP) when Auto-Negotiation is off
• AutoCrossAutomatically detects and configures the twisted pair port on the converter to the correct MDI or MDI-X configuration.
• Link Pass ThroughLink Pass Through is a troubleshooting feature that allows the media converter to monitor both the fiber and copper RX ports for loss of signal.
• Remote Fault Detect
• Pause

Specification Description

Port One: 10/100/1000BASE-T (RJ45) [100 m/328 ft.]
Fiber Optic Connector Specs.Multimode: Min TX PWR: -10.0 dBm Max TX PWR: -4.0 dBm RX Sensitivity: -17.0 dBm Max In PWR: 0.0 dBm Link Budget: 7.00 dB
Single-mode.Power: External AC/DC required: 12V DC, 1.25 A, unregulated, standard
Single-mode.Regulatory Compliance: CISPR/EN55022 Class A, EN55024, EN61000, FCC Class A, CE Mark
Single-mode.Sgfeb1029-120: Min TX PWR: -8.0 dBm Max TX PWR: -3.0 dBm RX Sensitivity: -21.0 dBm Max In PWR: -3.0 dBm Link Budget: 13.00 dB
Single-mode.Warranty: Lifetime
Single-mode.Sgfeb1035-120: Min TX PWR: 0.0 dBm Max TX PWR: 5.0 dBm RX Sensitivity: -27.0 dBm Max In PWR: -3.0 dBm Link Budget: 27.00 dB
Filtering : 8K MAC es
Max Frame Size: 802.3ac taed: 1628 bytes untagged: 1632 bytes
Single-mode.Sgfeb1017-120: Min TX PWR: -3.0 dBm Max TX PWR: 2.0 dBm RX Sensitivity: -23.0 dBm Max In PWR: -3.0 dBm Link Budget: 20.00 dB
Single-mode.Shipping Weight: 2 lb. [0.9 kg]
Single-mode.Sgfeb1029-122: Min X PWR: -3.0 dBm Max TX PWR: 2.0 dBm RX Sensitivity: -23.0 dBm Max In PWR: -3.0 dBm Link Budget: 20.00 dB
Single-mode.Sgfeb1014-120: Min TX PWR: -13.0 dBm Max TX PWR: -3.0 dBm RX Sensitivity: -20.0 dBm Max In PWR: -3.0 dBm Link Budget: 7.00 dB
Single-mode.Dip Switches: Switch 1: TX - Enable/Disable Auto-Negotiation Switch 2: TX - Force 10Mbs or 100Mbs with Switch 1 off Switch 3: TX - Force Half or Full duplex with Switch 1 off Switch 4: Enable/Disable LPT Switch 5: not used Switch 6: not used
Sing le-mode.Status Leds: PWR: ON green = Power applied to card TP (Duplex/Link/Activity): Orange: ON = Half-duplex Link
BLINK = Activity
Green: ON = Full-duplex Link
BLINK = Activity TP (10Mbs/100Mbs/1000Mbs): Off = 10Mbs
Orange = 100Mbs
Green = 10bs LACT (Fiber Link/Activity): Green: ON = Link
BLINK = Activity
Single-mode.Power Consumption: 4.8 watts
Single-mode.Sgfeb1029-121: Min TX PWR: -8.0 dBm Max TX PWR: -3.0 dBm RX Sensitivity: -21.0 dBm Max In PWR: -3.0 dBm Link Budget: 13.00 dB
Sile-mode.Safety Compliance: Wall Mount Power Supply: UL Listed & CSA certified
Single-mode.Sgfeb1015-120: Min TX PWR: -5.0 dBm Max TX PWR: 0.0 dBm RX Sensitivity: -20.0 dBm Max In PWR: -3.0 dBm Link Budget: 15.00 dB
Port Two: 1000BASE-SX 850nm multimode (SC) [62.5/125 m: 220 m/722 ft.
50/125 m: 550 m/1804 ft.]
Data Rate: Copper: 10/100/1000 Mbps Fiber: 1000 Mbps
Single-mode.Dimensions: Width: 3.25" [82 mm] Depth: 4.8" [122 mm] Height: 1.0" [25 mm]
Single-mode.Environment: 0 50C operating, -40

Tech Info

Tech Info and Standards: IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3z