ICRealtime PWR-POE-8-V3 8 Port Unmanaged PoE Switch 96W Max. Supports 1 Hi POE port.

If you are installing a network switch for POE cameras, IC Realtime’s new PWR-POE-8-V3 is, without doubt, one the best camera integration solutions we have ever offered. This has features and capacity to make it any integrator’s first choice where remote is required.

HIGH POWER LONG DISTANCE POE
Don’t let PWR-POE-8-V3’s compact 7.5” x 4” 1.25” size fool you. With total 96 watts power, can up cameras drive over 800 feet reach locations. red highlighted Port 1 even provide 90 High (802.3bt) power-hungry PTZ camera.

CAMERA MANAGEMENT AUTO-REBOOT
We all know freeze or drop out from blips other random reasons, resulting in unhappy users service call simple reset/reboot. reduces eliminates annoying issue 2 that will both intelligently monitor attached adjust fluctuations prevent issues, automatically attempt reboot unresponsive cameras.

8 CAM PORTS + UPLINK PORTS
Avoiding datastream choke points between IP NVR means smoother streaming dependably use greater resolution higher rates. While 10/100 Mbps (PoE) assure solid camera-to-switch rates, speed rest route back NVR, dual double thruput. also be set by DIP an extended mode range (but at lower speed) when needed.

THE PERFECT SWITCH?
Is just another switch? Far it. optimized cameras. fact, alone could justify upgrading working switches on distant problem-prone installation.

With professional capabilities, skills, video most demanding installations, professionals would pressed find better anywhere.

Features

• Supports management
• 96W budget
• Intelligent PoE, PD Alive support
• Long supports max 820ft (250m)
• Conforms IEEE802.3af; IEEE802.3at; Hi-PoE; IEEE802.3bt (Port Hi-PoE)