Save installation time and money with PoE
The Intellinet Network Solutions 8-Port Gigabit Ethernet PoE+ Web-Managed Switch is designed to pass both data electrical power a number Poe compatible devices via standard Cat5e or Cat6 cables. Equipped eight ports (all which support 802.3at/af PoE/PoE+), this can wireless LAN access points bridges, VoIP phones, IP video cameras more while delivering speeds up 1000 Mbps.
Power over 802.3at
The supports the IEEE 802.3at protocol inject 30 watts per port.* IEEE802.3af- IEEE802.3at-compliant attached require no additional power, eliminates expense rewiring minimizes unsightly clutter caused by supplies adapters in awkward places like ceilings walls. Any mix non-PoE supported, thanks its short circuit, overload high-voltage protection function, your equipment well protected. For that are not compliant (legacy cameras), we suggest use an PoE/PoE+ Splitter.
Self-Healing increased reliability stability - Powered Device Monitor (PDM)
This Monitoring, self-healing function. watchdog performs PD alive check all connected PDs automatically resets unresponsive devices, such as security surveillance cameras, cutting off then restoring power. PDM function especially useful applications where critical operation, industrial settings. added benefit, helps eliminate unnecessary technical calls costly field trips field-support engineers because functional reboot often bring back online.
Web Management
This impressive array advanced management functions allow you be full control network. 8-Port Gigabit VLAN, aggregation, QoS it SNMP V1 popular V2c, just to name few.
PoE Management
The provides extensive features. delay-time-per-port feature reduces hike usually happens at system start, priority (low, medium, high) allows define mission-critical, high-priority will continue receive even if switch's budget limit has been exceeded. Furthermore, maximum available port, turn on current draw devices. Finally, send SNMP-traps messages alert administrator total exceeds user-defined threshold value.
Eliminate Bottlenecks 10 Ports
Equipped auto-sensing Mbps RJ45 ports, offers plenty performance computers, servers other networking addition, two small, form-factor pluggable GBIC module slots (SFP) provide fiber connectivity greater distances. These shared combo but true pushing bandwidth 20 Gbps.
Features
- Provides connection devices
- Save existing cables
- Self-Healing (PDM) restarts fails respond out traffic
- Domotz cloud (may firmware upgrade)
- For desktop mounted 19" rack
- 10/100/1000 detect optimal speeds
- Two small (SFP)
- IEEE 802.3at/af-compliant output ports
- Power 30 watts port*
- PoE 140 watts
- PoE surge (4 kV) ports
- 20 Gbps fabric
- Supports 802.3af-compliant (wireless points, etc.)
- Green power-saving technology deactivates unused adjusts levels based cable length
- Complies 802.3az (Energy Efficient EEE) specification
- IEEE deactivated
- Supports detection protection
- All Auto-MDIX (auto uplink) support
- Configuration Web browser, Telnet SSH
- Remote Reboot/restart
- Supports management
- PoE – settings, power-on delay
- IGMP Snooping multicast filtering
- SNMP V1, V3 RMON groups 1, 2, 3 & 9
- Supports VLAN (tag-based port-based)
- Supports link aggregation (trunking)
- Supports mirroring
- QoS (Quality Service) management
- Broadcast storm packet rate settings
- Store forward switching architecture
- Supports jumbo frames 9 Kbytes
- Supports Tree/Spanning Tree protocol
- IEEE 802.3x flow duplex
- Supports 8k MAC address entries
- 512 Kbytes buffer memory
- High-efficiency fan delivers quiet, reliable cooling
- Desktop-size metal case
- Includes rackmount brackets
- Fully NDAA-compliant
Downloads
561167-Specsheet
561167-.Quick-Instruction-Guide 561167-ManualThere are no reviews for this product.
No questions about this product.