Power over Ethernet Switch with 26 ports - RJ45 and Two SFP, High-Power PoE+, PD Alive, VLAN PoE Extend Mode
The Intellinet Network Solutions 24-Port Gigabit PoE+ 2 SFP passes both data electrical power to a number PoE-compatible devices via standard Cat5e or Cat6 cables. Equipped ports, this can wireless LAN access points bridges, VoIP phones, IP video cameras more while delivering speeds up 1,000 Mbps.
Power 802.3at
This high-powered supports the IEEE 802.3at protocol inject 30 watts per port. IEEE802.3af- IEEE802.3at-compliant attached need no additional help avoid time expense rewiring minimize unsightly clutter supplies adapters on ceilings walls. Any mix non-PoE is supported, thanks its short-circuit, overload high-voltage protection function, your equipment well-protected. For that are not 802.3at/af compliant (legacy cameras), we suggest use an PoE/PoE+ Splitter.
Eliminate Bottlenecks Ports
Equipped auto-sensing Mbps offers plenty performance computers, servers other networking devices. In addition, small form-factor pluggable (SFP) GBIC module slots provide fiber connectivity greater distances. These not shared combo-ports but true pushing total available bandwidth 52 Gbps.
Self-Healing increased reliability stability Powered Device Monitor (PDM)
This has self-healing function called "Powered Monitoring." watchdog does alive check all connected PDs automatically resets aren't responding, like security cameras, by cutting then turning it back on. PDM especially useful industrial surveillance settings where important how works. As added bonus, helps cut down unnecessary technical support calls expensive field trips field-support engineers. because functional reboot often bring unresponsive online.
PoE Mode ideal cameras
Selectable convenient slide front panel, you manually activate "PoE Mode" reduces speed extends range 250 m (820 ft.), which deliver longer distances.
Features
- Provides data
- Two 1G slots
- PoE budget 370 watts
- Self-Healing feature (PDM) restarts fails respond send out traffic
- Power output port
- Manual isolate 1 from each other allowing them communicate uplink 25 26
- Manual (reduces m/820 ft.)
- PoE mode, camera installations
- 52 Gbps fabric
- 10/100/1000 detect optimal speeds
- Complies 802.3az (Energy Efficient EEE) specification
- Green power-saving technology deactivates unused adjusts levels based cable length
- Saves installation costs existing cables
- Supports 802.3af-compliant (e.g., points, cameras)
- Supports detection short circuit, protection
- Auto-MDIX NWay auto-negotiation ports
- Supports jumbo frames 9216 Bytes
- Store forward switching architecture
- Supports 802.3x flow control full duplex collision-based backpressure half mode
- Supports 8k MAC address entries Auto-learning Auto-aging
- Buffer memory 4.1 Mbits
- Grounding point protect external surges
- ESD 8 kV (air) 6 (contact)
- Two high-volume cooling fans ensure perfect ventilation
- Includes 19" rackmount brackets
- Fully NDAA-compliant
Downloads
561907-Specsheet
561907-Quick-Instruction-GuideThere are no reviews for this product.
No questions about this product.