Model:
NS3550-2T-8S
SKU:
NS3550-2T-8S
Availability:
In Stock
$1,400.00
  0 reviews
Condition: New Brand: Interlogix NDAA Compliance: Yes # of Ports: 10 PORT Data Rate: 10/100/1000 Mbps Management: Managed Form Factor: Rackmount PoE: No

The IFS NS3550-2T-8S is an Industrial Gigabit Fiber Managed Switch equipped with eight 100/1000Mbps SFP (fiber) ports and two 10/100/1000Mbps RJ45 ports.

This a fully Layer 2 that provides robust hardened design for rapid operational recovery in the event network or power system failure.

Layer Switch

The Series supports advanced features including IEEE 802.1Q VLAN, GVRP, port link aggregation, QoS, broadcast storm control and MAC address filtering. also includes IGMP snooping querying multi-casting media operations bandwidth utilization to fi t variety applications. Via aggregation supporting ports, allows operation high-speed trunk combining multiple ports. maximum four can be assigned groups support fail-over as well. Additionally, its standards-compliant implementation ensures interoperability with equipment from other vendors.

Industrial-grade Redundancy Recovery

These switches not only incorporate industry standard Spanning Tree Protocol (IEEE 802.1w RSTP), but advanced Industrial Fail-Safe (IFS) technology accommodating redundant ring topologies improved time of less than 20ms. supply to further enhance reliability up-time. Ideal use implementing highly fault-tolerant mesh architectures, these are well suited harsh environments such security, factory automation intelligent transportation systems (ITS).

Robust Design

With IP-30 rated enclosure, provide high level immunity against electromagnetic (EMI) radio-frequency (RFI) interference typically found environments. This comply IEC60068-2-xx standards free-fall, shock, vibration operate -40 degree C~75 C temperatures difficult plant floors curbside traffic cabinets.

Product Features

  • 8-ports 100/1000Base-X 2-ports 10/100/1000Base-T
  • Auto MDI/MDI-X
  • Auto-negotiation
  • (1) RJ-45 Console Port
  • IP30 Aluminum Metal Case Protection
  • DIN-rail Wall Mount Design
  • 48VDC, w/Polarity Reverse Protect Function
  • Prevents Packet Loss w/Back Pressure (Half-Duplex) 802.3x PAUSE Frame Flow (Full-Duplex)
  • High Performance Store-and-Forward Architecture Runt/CRC Filtering Eliminate Erroneous Packets Optimize Bandwidth
  • Storm Support
  • Ingress Shaper Egress Rate Limit per Control
  • 8 Priority Queues on All Ports
  • Traffic Classification
  • Supports v1, v2 v3
  • Supports MLD v1 v2
  • Querier Mode Support
  • IEEE 802.1x Port-Based / MAC-Based Access Authentication
  • Built-in RADIUS Client Co-operate w/the Servers
  • TACACS+ Log-in Users Authentication
  • Switch Management Interfaces
  • Console Telnet Command Line Interface
  • Web Management

Downloads

NS3550-2T-8S User Manual (Size: 6.2 MB)
Quick Installation Guide 254 KB)
Reviews: 0

There are no reviews for this product.

Questions: 0

No questions about this product.

Similar products