The Gefen EXT-DP-CP-2FO extends DisplayPort up to 1000 feet (300 meters) using two strands of 50/125µm multi-mode (OM2/OM3) LC-terminated fiber optic cable. Resolutions 2560 x 1600 (WQXGA) are supported. 62.5/125µm (OM1) may also be used for a maximum range 500 (150 meters). Compared similar copper-based solutions, optical signal transmission provides galvanic isolation and much better resistance electromagnetic interference. Sender Receiver modules feature cast Aluminum enclosures, providing further immunity radiated noise. Female connectors allow optimized lengths cables used, preventing stress on source display connectors. This, along with the compact size help create clean trouble-free installation by reducing clutter around connector panels. included cables, connect computer module Hi-Def display. duplex multimode cable from unit. at reduced Plug power supplies into available electrical outlets. Alternately, you and/or unit USB Type DC connecting them between or device that is capable supplying 5V 500mA. all associated equipment. vibrant picture will appear your display.
Features
- Extends over 2 cable
- Extends cable
- Supports 1080p Full HD 120Hz dual-link (WQXGA)
- Compliant 1.1a standard
- Supports Dual-Mode DP (DP++)
- Supports auxiliary/l²C channel fiber
- Cast enclosures eliminate susceptibility interference (EMI)
- HDCP DPCP-compliant
- Compact provide easy installation
- FCC CE compliant RFI (radio frequency interference) EMI
- Video bandwidth: 10.8Gbps (2.7Gbps per lane, 4 lanes)
- Video Input (Sender): (1) DP-20-pin, female
- Video Output (Receiver): female
- Link (Sender/Receiver): (2) LC
- Power Supply DC
- Power Consumption 2.1W max. (each)
- Optical Budget: 9.4 dB
- Operating Temperature: 0° + 50° C
- Storage 30° 70° C
- Operating Humidity: 10 85% RH, non-condensing
- Storage 5 90% non-condensing
- Dimensions (W H D): 1.4' 0.6' 2.8' (35mm 16mm 72mm)
There are no reviews for this product.
No questions about this product.