Spec Sheet
Features
- FEATURES:
- Economical and easy to install
- Conveniently and quickly install APs and antennas from most vendors’ in cloud or canopy ceiling panels
- AP mounts flush to the ceiling, providing an aesthetic, professionally installed appearance
- 20 ga. galnized steel panel bridge and Speed Link support wire prevent ceiling panel sag or cracking
- SPECIFICATIONS:
- Design: Recessed installation kit for installing APs and antennas in cloud, canopy, or suspended ceiling panels. Comprised of steel ceiling pael bridge, Speed Link support wire, AP or antenna bracket, and trim for AP or antenna from leading vendors, as identified in Oberon’s Model 1040 configuration guide
- Performance: UL listed for low voltage applications and designed to meet NEC300-22 and 300-23 for plenum installations. OSHPD approved, OPM-0110-13. De-rate AP operating temperature range by 11C when mounted in enclosure
- AP/antenna trim is interchangeable for other APs or antennas. Trim attaches with torsion springs
- Construction: 20 ga. galvanized steel panel bridge, all metal bracket and trim. (Model 1040-FL only: Paintable, UL 94-5VA ABS plastic cover, virtually transparent to wireless signals)
- Use included Speed Link support wire to attach to building structure
- SIZES:
- 23.37x 16 x 3 in. (594 x 406 x 76mm)
- Suitable for both North American and European (metric) sized ceilings
- SAFETY:
- UL 2416, Audio/Video, Information and Communication Technology Equipment Cabinet, Enclosure & Rack Systems
- CSA C22.2 NO. 60950-1-07 + A 1 Amd. 2 Information Technology Equipment -- Safety. Part 1, General Requirements
- INCLUDES:
- (1) Galvanized steel ceiling panel bridge
- (1) AP or antenna specific bracket and trim (See Oberon’s Model 1040 configuration guide)
- Model 1040-FL only: Cisco mounting bracket, (1) AP mount T-bar bracket and (1) ABS plastic cover
- (1) 3 meter long Caddy Speed Link support wire (P/N SLD15L3)
- Installation instructions
- ACCESSORIES:
- 39-104X-ROUTER-TEMPLATE: Routing template to simplify ceiling tile out for all 1040 and 1044 series AP trims
Specification Description
Design: Recessed installation kit for installing APs and antennas in cloud, canopy, or suspended ceiling panels. Comprised of steel ceiling panel bridge, Speed Link support wire, AP or antenna bracket, and trim for AP or antenna from leading vendors, a s identified in Oberon’s Model 1040 configuration guide
Performance: UL Listed for low-voltage applications and designed to meet NEC300-22 and 300-23 for plenum installations
AP/antenna trim is interchangeable for other APs or antennas. Trim attaches with torsion springs
Construction: 20 ga. galvanized steel panel bridge, all metal bracket and trim. (Model 1040-FL only: Paintable, UL 94-5VA ABS plastic cover, virtually transparent to wireless signals)
Use included Speed Link support wire to attach to building structure
Size: 23.375 x 16 x 3 in. (594 x 406 x 76mm)
Suitable for both North American and European (metric) sized ceilings
Technical
There are no reviews for this product.
No questions about this product.
