The AFI-118 features a high power, long excursion, 18" (460mm) cone driver capable of deep, rich, and extremely powerful bass. It works perfectly in combination with the AFI-8 or other AFI full-range speakers. The AFI-118 is superb for multi-media presentations, clubs, churches, discos, concert halls, and theaters.
Features
- Low Frequency: Apogee 18"(460mm) permanent magnet cone-type driver is treated with a waterproofing compound, providing resistance to moisture, and enabling long-term stability of cone resonance and cone mass parameters
- Input Connectors: Barrier strip, screw type #8
- Compatible Processors: AFI Main Frame Controller Chassis (using AFI-118 Module) or DLC24
- Recommended Crossover: Contact Apogee for full technical data on other DSP-based Processors
- Handles: Two handles - one top, one bottom - designed as an integral part of the enclosure (no moving parts)
- Grille: Highly durable, quality finish on perforated steel (aluminum on SX version)
- Rigging Hardware: Fourteen rigging points, four each on top and bottom, two each on both sides and rear, all backed with 16-gauge steel; points can be type 3/8"-16 or M10 thread
- Finish: Textured high-strength black or white epoxy paint; other colors optional
- Enclosure Type: Rectangular, optimally-vented bass
- Cabinet Construction: Multi-ply hardwood
Downloads
106-0916-Specsheet
The AFI-118 features a high power, long excursion, 18" (460mm) cone driver capable of deep, rich, and extremely powerful bass. It works perfectly in combination with the AFI-8 or other AFI full-range speakers. The AFI-118 is superb for multi-media presentations, clubs, churches, discos, concert halls, and theaters.
Features
- Low Frequency: Apogee 18"(460mm) permanent magnet cone-type driver is treated with a waterproofing compound, providing resistance to moisture, and enabling long-term stability of cone resonance and cone mass parameters
- Input Connectors: Barrier strip, screw type #8
- Compatible Processors: AFI Main Frame Controller Chassis (using AFI-118 Module) or DLC24
- Recommended Crossover: Contact Apogee for full technical data on other DSP-based Processors
- Handles: Two handles - one top, one bottom - designed as an integral part of the enclosure (no moving parts)
- Grille: Highly durable, quality finish on perforated steel (aluminum on SX version)
- Rigging Hardware: Fourteen rigging points, four each on top and bottom, two each on both sides and rear, all backed with 16-gauge steel; points can be type 3/8"-16 or M10 thread
- Finish: Textured high-strength black or white epoxy paint; other colors optional
- Enclosure Type: Rectangular, optimally-vented bass
- Cabinet Construction: Multi-ply hardwood
Downloads
106-0916-Specsheet
There are no reviews for this product.
No questions about this product.
