ETS ETS-DS1 Door Contact Shunt Timer

Door Contact Shunt Timer.

The DS1 is designed for use on egress doors (with no card reader) equipped with magnetic locks or strikes, a request to exit device such as a PIR or electric panic bar, and a door contact switch. After an egress signal is received, the door contact shunt time begins. If the door is left open, after the timer times out, an alarm will result. If the door closes before the timer time ends, the timer is automatically reset and the contact is re-armed.

• LED alarm indicator
• N.C. dry contact alarm output and RTE
• Jumper configurable for any application
• Easy cable run terminations
• Power: 12VDC @ 20mA
• Dimensions: W 2.40 x L2.80

Downloads

Door Contact Shunt Timer.

The DS1 is designed for use on egress doors (with no card reader) equipped with magnetic locks or strikes, a request to exit device such as a PIR or electric panic bar, and a door contact switch. After an egress signal is received, the door contact shunt time begins. If the door is left open, after the timer times out, an alarm will result. If the door closes before the timer time ends, the timer is automatically reset and the contact is re-armed.

• LED alarm indicator
• N.C. dry contact alarm output and RTE
• Jumper configurable for any application
• Easy cable run terminations
• Power: 12VDC @ 20mA
• Dimensions: W 2.40 x L2.80

Downloads