Ethernet over coax/CAT5e Mini Transceiver. Transmits IP video/data over coax up to 300m or CAT5e up to 500m @ 100mbps full duplex and supports PoE (IEEE 802.3af) or PoE+ (IEEE 802.3at). Compatible with eBridge100RM, eBridge400PCRM, eBridge800PCRM and eBridge1600PCRM. UL/cUL Listed (UL60950-1). CE Approved.
eBridge100ST EoC transceiver transmits data at 100Mbps, Full Duplex over Coax cable to a paired eBridge receiver and provides power in a PoE+ compliant format to an enabled device/camera. The eBridge receiver is available in various options (see compatibility list below/Altronix.com) and is powered by an external midspan, such as the Altronix Netway series. The receiver passes PoE+ power over the same coax cable to the eBridge100ST transceiver, which, in turn, passes this power to an enabled IP camera/device. These plug and play units facilitate cost-effective solutions for IP devices. They can be installed at distances greater than 300m. They provide a simple way to replace legacy analog products with new IP devices over existing coax. eBridge100ST is compatible with the following Altronix receivers: eBridge100RM, eBridge400PCRM, eBridge800PCRM or eBridge1600PCRM.
- Connectivity: RJ45, auto-crossover
- Wire type: 4-pair CAT5
- Yellow LED- PoE ON (by respective RJ45 jack)
- Yellow and Green LED (RJ45) IP Link status, 10/100Base-T/active
- Blue LED: Coax Link is active
- Auto detection and protection of legacy non-PoE cameras/devices
Applications:
-Retrofit digital IP cameras in an analog CCTV installation.
-Works with Megapixel, HD720, HD1080 and VGA (SD) cameras.
-Extend Network link distance in an industrial environment over 610m.
-Upgrade deployed CCTV Coax to a digital network in Retail, Casinos, Airports, Schools, Hospitals, etc.
Downloads
Ethernet over coax/CAT5e Mini Transceiver. Transmits IP video/data over coax up to 300m or CAT5e up to 500m @ 100mbps full duplex and supports PoE (IEEE 802.3af) or PoE+ (IEEE 802.3at). Compatible with eBridge100RM, eBridge400PCRM, eBridge800PCRM and eBridge1600PCRM. UL/cUL Listed (UL60950-1). CE Approved.
eBridge100ST EoC transceiver transmits data at 100Mbps, Full Duplex over Coax cable to a paired eBridge receiver and provides power in a PoE+ compliant format to an enabled device/camera. The eBridge receiver is available in various options (see compatibility list below/Altronix.com) and is powered by an external midspan, such as the Altronix Netway series. The receiver passes PoE+ power over the same coax cable to the eBridge100ST transceiver, which, in turn, passes this power to an enabled IP camera/device. These plug and play units facilitate cost-effective solutions for IP devices. They can be installed at distances greater than 300m. They provide a simple way to replace legacy analog products with new IP devices over existing coax. eBridge100ST is compatible with the following Altronix receivers: eBridge100RM, eBridge400PCRM, eBridge800PCRM or eBridge1600PCRM.
- Connectivity: RJ45, auto-crossover
- Wire type: 4-pair CAT5
- Yellow LED- PoE ON (by respective RJ45 jack)
- Yellow and Green LED (RJ45) IP Link status, 10/100Base-T/active
- Blue LED: Coax Link is active
- Auto detection and protection of legacy non-PoE cameras/devices
Applications:
-Retrofit digital IP cameras in an analog CCTV installation.
-Works with Megapixel, HD720, HD1080 and VGA (SD) cameras.
-Extend Network link distance in an industrial environment over 610m.
-Upgrade deployed CCTV Coax to a digital network in Retail, Casinos, Airports, Schools, Hospitals, etc.
Downloads
There are no reviews for this product.
No questions about this product.
