Altronix PACE1PRMTHT Long Range Ethernet Adapter Kit, 100Mbps, IP and PoE+ over Extended Distance CAT5e Solution

Altronix Pace1PRMTHT is a long range Ethernet adapter kit which transmits data at 100mbps full duplex and power via a CAT5e or higher cable in a PoE(+) compliant format. Pace1PRMHT receiver is powered via a PoE midspan, such as the Altronix Netway series, or by an endspan. The receiver passes the PoE(+) compliant power over the cable to Pace1PTM transceiver which, in turn, passes this power to an enabled IP camera/device. These plug and play units facilitate cost-effective solutions for IP devices that need to be installed at distances greater than 100m.

Features

Input

Pace1PRMHT:

• Powered by midspan or endspan. PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W)

Pace1PTM:

• Powered by Pace1PRM

Ethernet

• Connectivity: RJ45, auto-crossover
• Wire type: 4-pair CAT-5
• Distance: CAT5e: up to 500m (1,600 ft.)
• Throughput is rated to pass 100mbps of data
• With proper headend equipment multiple Megapixel cameras can be used
• Speed: 100BaseT, full duplex, auto negotiation

LED Indicators

• Green LED: PoE ON
• Yellow and Green LED (by RJ45 jack): IP Link status, 100Base-T/active

Temperature

Operating Temperature:

• Pace1PRMHT:
• 15W: – 40ºC to 75ºC (– 40ºF to 167ºF)
• 25W: – 40ºC to 49ºC (– 40ºF to 120ºF)
• Pace1PTM:
• 15W: – 40ºC to 75ºC (– 40ºF to 167ºF)
• 25W: – 40ºC to 70ºC (– 40ºF to 158ºF)
• 30W: – 40ºC to 60ºC (– 40ºF to 140ºF)

Storage Temperature:

• -40ºC to 75ºC (-40º to 167ºF)
• Relative humidity: 85%, +/- 5%, non-condensing

Operating Altitude

• - 304.8 to 2,000m

Downloads

Altronix Pace1PRMTHT is a long range Ethernet adapter kit which transmits data at 100mbps full duplex and power via a CAT5e or higher cable in a PoE(+) compliant format. Pace1PRMHT receiver is powered via a PoE midspan, such as the Altronix Netway series, or by an endspan. The receiver passes the PoE(+) compliant power over the cable to Pace1PTM transceiver which, in turn, passes this power to an enabled IP camera/device. These plug and play units facilitate cost-effective solutions for IP devices that need to be installed at distances greater than 100m.

Features

Input

Pace1PRMHT:

• Powered by midspan or endspan. PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W)

Pace1PTM:

• Powered by Pace1PRM

Ethernet

• Connectivity: RJ45, auto-crossover
• Wire type: 4-pair CAT-5
• Distance: CAT5e: up to 500m (1,600 ft.)
• Throughput is rated to pass 100mbps of data
• With proper headend equipment multiple Megapixel cameras can be used
• Speed: 100BaseT, full duplex, auto negotiation

LED Indicators

• Green LED: PoE ON
• Yellow and Green LED (by RJ45 jack): IP Link status, 100Base-T/active

Temperature

Operating Temperature:

• Pace1PRMHT:
• 15W: – 40ºC to 75ºC (– 40ºF to 167ºF)
• 25W: – 40ºC to 49ºC (– 40ºF to 120ºF)
• Pace1PTM:
• 15W: – 40ºC to 75ºC (– 40ºF to 167ºF)
• 25W: – 40ºC to 70ºC (– 40ºF to 158ºF)
• 30W: – 40ºC to 60ºC (– 40ºF to 140ºF)

Storage Temperature:

• -40ºC to 75ºC (-40º to 167ºF)
• Relative humidity: 85%, +/- 5%, non-condensing

Operating Altitude

• - 304.8 to 2,000m

Downloads