Pace1ST is a long range Ethernet transceiver designed for use with Pace1PRM, Pace4PRM, Pace8PRM and Pace16PRM receivers. They transmit data at 100mbps full duplex and power via Cat5e or higher cable in a PoE(+) compliant format. The Pace1ST will not deliver power to non compliant devices, thus avoiding damage to improperly connected non-PoE cameras/devices. The receiver passes the PoE(+) compliant power over the cable to the Pace1ST transceiver which in turn passes this power to an enabled IP camera/device. These plug and play units facilitate cost effective solutions for IP devices that need to be installed at distances greater than 100m.
Applications
- Retrofit digital IP cameras in an analog CCTV CAT5e installations
- Works with IP Megapixel and non Megapixel cameras.
- Extend Network link distance in an industrial environment over 610m.
Input
- PoE (15W) IEEE 802.3af compliant or PoE+ (30W) IEEE 802.3at compliant from Pace1PRM, Pace4PRM, Pace8PRM, or Pace16PRM.
Ethernet
- Connectivity: RJ45, auto-crossover.
- Wire type: 4-pair CAT5e or a single twisted pair UTP.
- Distance: up to 500m.
- Speed: 10/100BaseT, half/full duplex, auto negotiation. PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W) delivered to camera by Pace1ST.
- Throughput is rated to pass 100mbps of data.
CAT5e or Higher:
- Distance: up to 500m @ 100mbps.
LED Indicators
- Green - PoE ON (by respective RJ45 jack).
- Yellow and Green LED IP Link status, 10/100Base-T/active.
Environmental
- Operating Temperature: For 15W -40 F to 167 F (-40 C to 75 C). For 30W -40 F to 149F (-40 C to 65 C).
- Storage Temperature: -40 F to 167 F (-40 C to 75 C).
- Humidity: 20 to 85%, non-condensing.
- Operating Altitude: - 1000 to 6,561.679 ft. (- 304.8 to 2000m).
Functions
- Auto detection and protection of legacy non-PoE cameras/devices.
Downloads
Pace1ST is a long range Ethernet transceiver designed for use with Pace1PRM, Pace4PRM, Pace8PRM and Pace16PRM receivers. They transmit data at 100mbps full duplex and power via Cat5e or higher cable in a PoE(+) compliant format. The Pace1ST will not deliver power to non compliant devices, thus avoiding damage to improperly connected non-PoE cameras/devices. The receiver passes the PoE(+) compliant power over the cable to the Pace1ST transceiver which in turn passes this power to an enabled IP camera/device. These plug and play units facilitate cost effective solutions for IP devices that need to be installed at distances greater than 100m.
Applications
- Retrofit digital IP cameras in an analog CCTV CAT5e installations
- Works with IP Megapixel and non Megapixel cameras.
- Extend Network link distance in an industrial environment over 610m.
Input
- PoE (15W) IEEE 802.3af compliant or PoE+ (30W) IEEE 802.3at compliant from Pace1PRM, Pace4PRM, Pace8PRM, or Pace16PRM.
Ethernet
- Connectivity: RJ45, auto-crossover.
- Wire type: 4-pair CAT5e or a single twisted pair UTP.
- Distance: up to 500m.
- Speed: 10/100BaseT, half/full duplex, auto negotiation. PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W) delivered to camera by Pace1ST.
- Throughput is rated to pass 100mbps of data.
CAT5e or Higher:
- Distance: up to 500m @ 100mbps.
LED Indicators
- Green - PoE ON (by respective RJ45 jack).
- Yellow and Green LED IP Link status, 10/100Base-T/active.
Environmental
- Operating Temperature: For 15W -40 F to 167 F (-40 C to 75 C). For 30W -40 F to 149F (-40 C to 65 C).
- Storage Temperature: -40 F to 167 F (-40 C to 75 C).
- Humidity: 20 to 85%, non-condensing.
- Operating Altitude: - 1000 to 6,561.679 ft. (- 304.8 to 2000m).
Functions
- Auto detection and protection of legacy non-PoE cameras/devices.
Downloads
There are no reviews for this product.
No questions about this product.
