RS232/422 DB25 Repeater, 1310/1550nm, RTS/CTS Timer + Anti-Streaming, mm, 1 fiber.
The ComNet FDX55 Series consists of fully-digital transceiver units designed for implementing simplex or full-duplex RS232 Drop-and-Repeat poll-and-respond traffic signalization/communications data networks utilizing two optical fibers. These environmentally-hardened units are ideal for use in unconditioned out-of-plant or roadside installations and the master-configured transceiver unit may be located anywhere within the network, making this equipment ideal for applications involving on-street master controllers with upstream and downstream communication requirements. These units are compatible with the FDX50, FDX51 and FDX52 Series of optical modems, and ComNet model FDX55BE may be used as a cost-effective solution for use as a line-terminating transceiver. Manually resettable anti-streaming is included for unparalleled network protection. Optional battery backup capability provides the highest level of network reliability in the event of a loss of local prime operating power, and maintains continuous communications channel operation. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required.
- Meets EIA RS232C/D specifications (Simplex or Duplex)
- NTCIP compatible
- Tested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment
- Robust design assures extremely high reliability in unconditioned roadside environments
- User-selectable DTE or DCE interface ensures ease of installation and maximum versatility
- Supports Request to Send (RTS) and Clear to Send (CTS) signals
- RJ-11 expansion port provides network branching capability by electrically linking co-located transceiver units
- Voltage transient protection on all power and signal input/output lines provides protection from power surges and other voltage transient events
- Optional internal battery backup provides 12 hours operating time in the event of loss of 115 VAC prime operating power, and maintains continuous channel communications
- Wide optical dynamic range: optical attenuators are never required
- User-configurable optical and electrical Anti-Streaming provides network protection against faulty streaming controller operation
- Indicating LEDs display equipment operating status
- Hot-swappable rack modules
- Interchangeable between stand-alone or rack mount use – ComFit
Downloads
RS232/422 DB25 Repeater, 1310/1550nm, RTS/CTS Timer + Anti-Streaming, mm, 1 fiber.
The ComNet FDX55 Series consists of fully-digital transceiver units designed for implementing simplex or full-duplex RS232 Drop-and-Repeat poll-and-respond traffic signalization/communications data networks utilizing two optical fibers. These environmentally-hardened units are ideal for use in unconditioned out-of-plant or roadside installations and the master-configured transceiver unit may be located anywhere within the network, making this equipment ideal for applications involving on-street master controllers with upstream and downstream communication requirements. These units are compatible with the FDX50, FDX51 and FDX52 Series of optical modems, and ComNet model FDX55BE may be used as a cost-effective solution for use as a line-terminating transceiver. Manually resettable anti-streaming is included for unparalleled network protection. Optional battery backup capability provides the highest level of network reliability in the event of a loss of local prime operating power, and maintains continuous communications channel operation. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required.
- Meets EIA RS232C/D specifications (Simplex or Duplex)
- NTCIP compatible
- Tested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment
- Robust design assures extremely high reliability in unconditioned roadside environments
- User-selectable DTE or DCE interface ensures ease of installation and maximum versatility
- Supports Request to Send (RTS) and Clear to Send (CTS) signals
- RJ-11 expansion port provides network branching capability by electrically linking co-located transceiver units
- Voltage transient protection on all power and signal input/output lines provides protection from power surges and other voltage transient events
- Optional internal battery backup provides 12 hours operating time in the event of loss of 115 VAC prime operating power, and maintains continuous channel communications
- Wide optical dynamic range: optical attenuators are never required
- User-configurable optical and electrical Anti-Streaming provides network protection against faulty streaming controller operation
- Indicating LEDs display equipment operating status
- Hot-swappable rack modules
- Interchangeable between stand-alone or rack mount use – ComFit
Downloads
There are no reviews for this product.
No questions about this product.
