Model:
Interlogix POC252-1CXP-1T Power over Coax (Head End) Media Convertor
SKU:
POC252-1CXP-1T
Availability:
In Stock
$136.87
  0 reviews
Condition: New Brand: Interlogix NDAA Compliance: Yes Technology: Digital - IP Item Type: Ethernet to Coax Environment: Unhardened Data Rate: 10/100 Mbps Ports: 1-Port Form Factor: Surface Connectors: BNC, RJ-45 Number of Ports: 1 PoE: Yes Input Power: DC Remote Management: Yes Function: IP and Power over Coax Unit Type: Transmitter

The IFS Power over Coax Media Converters from Interlogix are designed to transmit both Ethernet data and power transmission over coax cable up to 3,281 ft. (1Km). This solution provides a cost-effective way to reduce installation costs and increase ROI by utilizing existing coax to migrate an analog video system to an IP surveillance system.

The POC252-1CXP-1T Power over Coax Media Converter transmits data and injects power over coax for use with the POC252-1CX-1P. This media converter is used to deploy a single IP camera on a length of coax cable when a multi-port BNC switch is not needed.

Coax Ports

  • 1 BNC ports
  • IEEE 1901 standard compliant for power
  • Wavelet-OFDM modulation
  • 128-bit AES security encryption
  • Daisy-chain (up to 4 devices on one link)

Ethernet Ports

  • 10/100Mbps Ethernet
  • Auto-negotiation and auto-MDI/MDI-X
  • Half-duplex back pressure and IEEE802.3x full-duplex
  • pause-frame fl ow control

Power over Ethernet

  • IEEE 802.3-af/at compliant on RJ45 Ethernet port
  • Up to 440W total power budget (dependent on switch model)
  • Remote power up to 3,281 ft. (1Km) with RG6 75Ω coaxial cable
  • Full PoE management
  • - Total power budget control
    - Power enable/disable per port
    - Power priority per port
    - Power limitation per port
    - Power scheduling per port
    - PD alive-checking

Downloads

POC252-1CXP-1T Data Sheet
(Size: 445.9 KB)
POC252-1CXP-1T User Manual
(Size: 832.5 KB)

The IFS Power over Coax Media Converters from Interlogix are designed to transmit both Ethernet data and power transmission over coax cable up to 3,281 ft. (1Km). This solution provides a cost-effective way to reduce installation costs and increase ROI by utilizing existing coax to migrate an analog video system to an IP surveillance system.

The POC252-1CXP-1T Power over Coax Media Converter transmits data and injects power over coax for use with the POC252-1CX-1P. This media converter is used to deploy a single IP camera on a length of coax cable when a multi-port BNC switch is not needed.

Coax Ports

  • 1 BNC ports
  • IEEE 1901 standard compliant for power
  • Wavelet-OFDM modulation
  • 128-bit AES security encryption
  • Daisy-chain (up to 4 devices on one link)

Ethernet Ports

  • 10/100Mbps Ethernet
  • Auto-negotiation and auto-MDI/MDI-X
  • Half-duplex back pressure and IEEE802.3x full-duplex
  • pause-frame fl ow control

Power over Ethernet

  • IEEE 802.3-af/at compliant on RJ45 Ethernet port
  • Up to 440W total power budget (dependent on switch model)
  • Remote power up to 3,281 ft. (1Km) with RG6 75Ω coaxial cable
  • Full PoE management
  • - Total power budget control
    - Power enable/disable per port
    - Power priority per port
    - Power limitation per port
    - Power scheduling per port
    - PD alive-checking

Downloads

POC252-1CXP-1T Data Sheet
(Size: 445.9 KB)
POC252-1CXP-1T User Manual
(Size: 832.5 KB)
Reviews: 0

There are no reviews for this product.

Questions: 0

No questions about this product.

Similar products