Pelco FRV10D1A2S1FC | 1 Bidirectional Data Channel Supports RS-232, RS-422, and RS-485 (2-wire/4-wire), Manchester, and Bi-Phase Communication | 1 Bidirectional Contact Closure. Buy Now.
The FRV10D1A2S1FC fiber receiver provide simultaneous transmission of one bidirectional video channel, one bidirectional data channel, two bidirectional audio channels, and one bidirectional contact closure over one optical fiber in a two-slot wide design. Unit are available in single-mode versions. The FRV10D1A2S1FC receiver provide transmission of two bidirectional 24-bit (96 kHz) audio signals with sample rate digital encoding for superior transmission of balanced line-level audio. Data selection offers a choice of RS-232, RS-422, and RS-485 (2-wire/4-wire), Manchester, and Bi-Phase Communication. The FRV10D1A2S1FC plug-and-play design ensures ease of installation by requiring no electrical or optical adjustments. Modular in design, FRV10D1A2S1FC unit can be rack-mounted using the EURACK/USRACK chassis, or stand-alone module can be placed on a desktop or mounted to a wall (wall mount kit not required). For stand-alone and wall mount installations, external power is required for the FRV10D1A2S1FC unit. The unit can be powered with the recommended FEXTPS fiber external power supply.
Features
- 10-Bit Digitally Encoded Bidirectional Video for High-Quality Transmission over a Single Fiber
- 1 Bidirectional Data Channel Supports RS-232, RS-422, and RS-485 (2-wire/4-wire), Manchester, and Bi-Phase Communication
- 2 Bidirectional 24-Bit (96 kHz) Digitally Encoded Audio Channels with 600-Ohm Balanced Line-Level Audio (up to +6 dBm) and 20 to 18 kHz Audio Bandwidth
- 1 Bidirectional Contact Closure
- Single-Mode Support for Distances up to 48 km (29.8 mi)
- Exceeds All Requirements for the EIA RS-250C Short-Haul Transmission Specification
- Laser Diode for Transmission of Optical Signals
- Compatible NTSC, PAL, and SECAM Video Standards
- Designed to Meet NEMA TS 1/TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards
- Voltage Transient Protection on All Power and Signal Input/Output Lines
- LED Status Indicators for Monitoring All Critical Operating Parameters
- Hot-Swappable Rack Modules
- Stand-Alone or Rack-Mountable Modular Design
Pelco FRV10D1A2S1FC | 1 Bidirectional Data Channel Supports RS-232, RS-422, and RS-485 (2-wire/4-wire), Manchester, and Bi-Phase Communication | 1 Bidirectional Contact Closure. Buy Now.
The FRV10D1A2S1FC fiber receiver provide simultaneous transmission of one bidirectional video channel, one bidirectional data channel, two bidirectional audio channels, and one bidirectional contact closure over one optical fiber in a two-slot wide design. Unit are available in single-mode versions. The FRV10D1A2S1FC receiver provide transmission of two bidirectional 24-bit (96 kHz) audio signals with sample rate digital encoding for superior transmission of balanced line-level audio. Data selection offers a choice of RS-232, RS-422, and RS-485 (2-wire/4-wire), Manchester, and Bi-Phase Communication. The FRV10D1A2S1FC plug-and-play design ensures ease of installation by requiring no electrical or optical adjustments. Modular in design, FRV10D1A2S1FC unit can be rack-mounted using the EURACK/USRACK chassis, or stand-alone module can be placed on a desktop or mounted to a wall (wall mount kit not required). For stand-alone and wall mount installations, external power is required for the FRV10D1A2S1FC unit. The unit can be powered with the recommended FEXTPS fiber external power supply.
Features
- 10-Bit Digitally Encoded Bidirectional Video for High-Quality Transmission over a Single Fiber
- 1 Bidirectional Data Channel Supports RS-232, RS-422, and RS-485 (2-wire/4-wire), Manchester, and Bi-Phase Communication
- 2 Bidirectional 24-Bit (96 kHz) Digitally Encoded Audio Channels with 600-Ohm Balanced Line-Level Audio (up to +6 dBm) and 20 to 18 kHz Audio Bandwidth
- 1 Bidirectional Contact Closure
- Single-Mode Support for Distances up to 48 km (29.8 mi)
- Exceeds All Requirements for the EIA RS-250C Short-Haul Transmission Specification
- Laser Diode for Transmission of Optical Signals
- Compatible NTSC, PAL, and SECAM Video Standards
- Designed to Meet NEMA TS 1/TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards
- Voltage Transient Protection on All Power and Signal Input/Output Lines
- LED Status Indicators for Monitoring All Critical Operating Parameters
- Hot-Swappable Rack Modules
- Stand-Alone or Rack-Mountable Modular Design
There are no reviews for this product.
No questions about this product.
